Configuration Guide User guide
1444 BigIron RX Series Configuration Guide
53-1002484-04
Multi-Chassis Trunking
E
show cluster [<name> | <id>] peer <peer-ip> “Displaying cluster peer state information” on
page 548
clear cluster [
<name> | <id>] peer <peer-ip> “Clearing the MCT cluster information” on page 549
loop-detection “Configuring port loop detection” on page 563
loop-detection [vlan
<vlan-id>]
loop-detection shutdown-disable “Disabling port shutdown” on page 564
loop-detection shutdown-sending-port “Shutting down the sending ports” on page 564
loop-detection syslog-interval
<mins> “Setting the syslog interval” on page 564
loop-detection disable-duration
<num> “Setting the disable duration” on page 565
loop-detection-interval
<num> “Setting the loop detection interval” on page 565
show loop detection ethernet
<port-num> | vlan
<vlan-id>
“Displaying port loop detection information” on
page 565
clear loop detection “Clearing port loop detection information” on
page 566
show mac “Displaying cluster MAC entries information” on
page 568
show mac cluster
<cluster-id> | <cluster-name> [local |
remote]
“Displaying cluster-specific MAC entries” on
page 569
show mac cluster
<cluster-id> | <cluster-name> client
<client-name> [local | remote]
“Displaying client-specific MAC entries” on page 569
show mac vlan
<vlan-id> “Displaying VLAN-specific MAC entries” on page 570
show mac cluster
<cluster-id> | <cluster-name> vlan
<vlan-id> [local | remote]
“Displaying cluster VLAN-specific MAC entries” on
page 570
show mac cluster
<cluster-id> |<cluster-name> vlan
<vlan-id> client <client-name> [local | remote]
“Displaying cluster client VLAN-specific MAC entries”
on page 571
show mac mdup-stats “Displaying MDUP packet information” on page 571
clear mac “Clearing MAC entries” on page 573
clear mac cluster
<cluster-id> | <cluster-name> [local |
remote]
“Clearing cluster-specific MAC entries” on page 573
clear mac cluster
<cluster-id> | <cluster-name> client
<client-name> [local | remote]
“Clearing client-specific MAC entries” on page 573
clear mac vlan
<vlan-id> “Clearing VLAN-specific MAC entries” on page 573
clear mac cluster
<cluster-id> | <cluster-name> vlan
<vlan-id> [local | remote]
“Clearing cluster VLAN-specific MAC entries” on
page 574
clear mac cluster
<cluster-id> |<cluster-name> vlan
<vlan-id> client <client-name> [local | remote]
“Clearing cluster client VLAN-specific MAC entries” on
page 574
clear mac mdup-stats “Clearing MDUP packets information” on page 574
short-path-forwarding [revert-priority
<value>] “Enabling VRRP-E short-path forwarding behavior” on
page 585
Commands See ...