Configuration Guide User guide

BigIron RX Series Configuration Guide 1445
53-1002484-04
Multicast (IP)
E
Multicast (IP)
Commands See ...
bsr-candidate ethernet <portnum> | loopback <num> |
ve
<num>
<hash-mask-length> [<priority>]
“Configuring BSRs” on page 682
clear pim rp-map “Configuring RPs” on page 682
default-gateway
<ip-addr> “Modifying default route” on page 726
disable-dvmrp “Globally enabling or disabling DVMRP without
deleting multicast configuration” on page 724
graft-retransmit-time
<5-3600> “Modifying graft retransmit time” on page 726
graft-retransmit-timer
<10-3600> “Modifying graft retransmit timer” on page 677
hello-timer
<10-3600> “Modifying hello timer” on page 676
inactivity-timer
<10-3600> “Modifying inactivity timer” on page 677
ip dvmrp “Enabling DVMRP on an interface” on page 724
ip dvmrp metric
<1-31> | ttl-threshold <1-64> |
[advertise-local on | off ]
“Modifying the metric” on page 727
“Modifying the TTL” on page 727
“Enabling advertising” on page 727
ip igmp group-membership-time
<1-7200> “Modifying IGMP (V1 and V2) membership time” on
page 658
ip igmp max-response-time
<num> “Modifying IGMP (V1 and V2) maximum response
time” on page 658
ip igmp query-interval
<1-3600> “Modifying IGMP (V1 and V2) query interval period”
on page 658
ip igmp static-group
<ip-addr> [ethernet <portnum>] “Adding an interface to a multicast group” on
page 659
ip multicast-routing “Changing IGMP V1 and V2 parameters” on
page 657
ip pim [version 1 | 2] “Enabling a PIM version” on page 675
ip pim border p. 23-16
ip pim ttl
<1-64> “Modifying the TTL” on page 678
ip pim-sparse “Configuring PIM interface parameters” on page 681
message-interval
<num> “Changing the PIM join and prune message interval”
on page 688
ip mroute
<ip-addr> <ip-mask> [<next-hop-ip-addr> |
ethernet
<slot/port> | ve <num> | null0] [<cost>]
[distance
< num>] }
“Configuring a static multicast route” on page 728
nbr-timeout “Modifying neighbor timeout” on page 675 (PIM)
“Modifying neighbor timeout” on page 725 (DVMRP)
probe-interval
<5-30> “Modifying probe interval” on page 726
prune-age
<20-3600> “Modifying prune age” on page 725
prune-timer
<10-3600> “Modifying prune timer” on page 676
prune-wait
<time> “Modifying the prune wait timer” on page 676