Configuration Guide User guide

1446 BigIron RX Series Configuration Guide
53-1002484-04
Multicast (IP)
E
report-interval <10-2000> “Enabling DVMRP on an interface” on page 724
route-discard-timeout
<40-8000> “Modifying route discard time” on page 725
route-expire-timeout
<20-4000> “Modifying route expires time” on page 725
router dvmrp “Globally enabling and disabling DVMRP” on
page 724
router pim “Globally enabling and disabling PIM” on page 674
“Configuring global PIM Sparse parameters” on
page 681
rp-address
<ip-addr> “Statically specifying the RP” on page 684
rp-candidate add I delete
<group-addr> <mask-bits> “Configuring RPs” on page 682
rp-candidate ethernet
<slot>/<portnum> | loopback
<num> | ve <num>
“Configuring RPs” on page 682
show ip pim | dvmrp rpf
<IP address> “Displaying information about an upstream neighbor
device” on page 728
“Displaying information about an upstream neighbor
device” on page 695
show ip pim bsr “Displaying BSR information” on page 691
show ip pim dense “Viewing the prune wait time” on page 676
show ip pim group “Displaying a list of multicast groups” on page 690
show ip pim mcache “Displaying the PIM multicast cache” on page 696
show ip pim nbr “Displaying multicast neighbor information” on
page 694
show ip pim rp-candidate “Displaying candidate RP information” on page 692
show ip pim rp-hash
<group-addr> “Displaying RP information for a PIM Sparse group”
on page 693
show ip pim rp-map “Displaying RP-to-group mappings” on page 693
show ip pim rp-set “Displaying the RP set list” on page 694
show ip pim sparse “Displaying basic PIM Sparse configuration
information” on page 689
show ip pim traffic “Displaying PIM traffic statistics” on page 698
spt-threshold infinity |
<num> “Changing the Shortest Path Tree (SPT) threshold” on
page 687
system-max dvmrp-mcache
<num> “Defining the maximum number of DVMRP cache
entries” on page 655
system-max pim-mcache
<num> “Defining the maximum number of PIM cache
entries” on page 655
trigger-interval
<5-30> “Modifying trigger interval” on page 726
Commands See ...