Configuration Guide User guide

1456 BigIron RX Series Configuration Guide
53-1002484-04
Security/Management
E
Authentication method list
Passwords
Privilege level
RADIUS
Commands See ...
aaa authentication snmp-server | web-server | enable |
login | dot1x default
<method1> [<method2>]
[
<method3>] [<method4>] [<method5>] [<method6>]
[
<method7>]
“Examples of authentication-method lists” on
page 106
Commands See ...
enable password-min-length <number-of-characters> “Specifying a minimum password length” on page 67
enable port-config-password
<text> “Setting passwords for management privilege levels”
on page 64
enable read-only-password
<text> “Setting passwords for management privilege levels”
on page 64
enable super-user-password
<text> “Setting passwords for management privilege levels”
on page 64
enable telnet password
<string> “Setting a Telnet password” on page 63
service password-encryption “Disabling password encryption” on page 67
Commands See ...
privilege <cli-level> level
<privilege-level> <command-string>
“Augmenting management privilege levels” on
page 65
show web “Displaying TACACS and TACACS+ statistics and
configuration information” on page 89
“Displaying RADIUS configuration information” on
page 103
Commands See ...
aaa accounting commands <privilege-level> default
start-stop radius | none
“Configuring RADIUS accounting for CLI commands”
on page 102
aaa accounting exec default
start-stop radius | none
“Configuring RADIUS accounting for Telnet/SSH
(Shell) access” on page 101
aaa accounting system default start-stop radius | none “Configuring RADIUS accounting for system events”
on page 102
aaa authentication enable
implicit-user
“Configuring Enable authentication to prompt for
password only” on page 99
aaa authentication login
privilege-mode
“Entering privileged EXEC mode after a Telnet or SSH
login” on page 99