Configuration Guide User guide

BigIron RX Series Configuration Guide 1463
53-1002484-04
Redundant management module
E
copy slot1 | slot2 flash [/<from-dir-path>/]<from-name>
monitor | primary | secondary
“Copying files between a flash card and flash
memory” on page 44
copy slot1 | slot2 image
<file-name> “Copying software image from a flash card to the
flash memory” on page 44
copy flash slot1 | slot2
<source-name> monitor | primary
| secondary | startup-config [
<dest-name>]
“Copying files between a flash card and a TFTP
server” on page 46
copy flash flash monitor standby “Copying software images between active and
standby management modules” on page 45
copy flash flash primary [standby] “Copying software images between active and
standby management modules” on page 45
copy flash flash secondary [standby] “Copying software images between active and
standby management modules” on page 45
copy flash lp
<source-file> <dest-file> <slot-number> | all “Copying files from a management module to an
interface module” on page 45
copy flash tftp
<ip-addr> <dest-file-name> primary |
secondary
“Copying BigIron RX Series Multi-Service IronWare
images from flash memory to a TFTP server” on
page 45
copy slot1 | slot2 tftp
<ip-addr>
[/
<from-dir-path>/]<source-file> [<dest-file>]
“Copying files between a flash card and a TFTP
server” on page 46
copy tftp slot1 | slot2
<ip-addr>
[/
<from-dir-path>/]<source-file> <path-name> | monitor
| primary | secondary
“Copying files between a flash card and a TFTP
server” on page 46
copy slot1 | slot2 startup-config
[/
<from-dir-path>/]<file-name>
“Copying the startup-config file between a flash card
and flash memory” on page 46
copy startup-config slot1 | slot2
[/
<to-dir-path>/]<to-name>
“Copying the startup-config file between a flash card
and flash memory” on page 46
copy startup-config tftp
<ip-addr>
[/
<to-dir-path>]<to-name>
“Copying the startup-config file between flash
memory and a TFTP server” on page 47
copy tftp startup-config
<ip-addr>
[/
<from-dir-path>]<from-name>
“Copying the startup-config file between flash
memory and a TFTP server” on page 47
copy running-config slot1 | slot2
[/
<to-dir-path>/]<to-name>
“Copying the running-config to a flash card or a TFTP
server” on page 47
copy slot1 | slot2 running-config
[/
<from-dir-path>/]<from-name>
“Loading a running-config from a flash card or a TFTP
server” on page 47
copy tftp running-config
<ip-addr>
[/
<from-dir-path>/]<from-name> [overwrite]
“Loading a running-config from a flash card or a TFTP
server” on page 47
cp [
<source-dir-path>]<source-file-name>
[
<dest-dir-path>]<dest-file-name>
“Copying files using the cp command” on page 48
boot system slot1 | slot2 [/
<dir-path>/]<file-name> “Rebooting from the system” on page 49
boot system tftp
<ip-address> <file-name> “Rebooting from the system” on page 49
boot system flash secondary “Rebooting from the system” on page 49
boot system slot1
<file-name> | slot2 <file-name> | flash
secondary | tftp
<ip-address> <file-name> | bootp
“Configuring the boot source for future reboots” on
page 50
Commands See ...