Configuration Guide User guide

BigIron RX Series Configuration Guide 1465
53-1002484-04
sFlow
E
sFlow
ip ssh password-authentication no | yes “Deactivating user authentication” on page 998
ip ssh permit-empty-passwd no | yes “Enabling empty password logins” on page 999
ip ssh port
<number> “Setting the SSH port number” on page 999
ip ssh pub-key-file tftp I
<tftp-server-ip-addr> <filename>
[remove]
“Importing authorized public keys into the device” on
page 997
ip ssh scp disable | enable “Using secure copy” on page 1002
ip ssh source-interface ethernet
<slot/port> | loopback
<num> | ve <num>
“Designating an interface as the source for all SSH
packets” on page 1000
ip ssh timeout
<seconds> “Setting the SSH login timeout value” on page 1000
kill ssh
<connection-id> “Displaying SSH connection information” on
page 1001
show ip client-pub-key [begin
<expression> | exclude
<expression> | include <expression>]
“Importing authorized public keys into the device” on
page 997
show ip ssh [begin
<expression> | exclude <expression>
| include
<expression>]
“Displaying SSH connection information” on
page 1001
show who [begin
<expression> | exclude<expression> |
include
<expression>]
“Displaying SSH connection information” on
page 1001
ssh access-group
<standard-named-acl> |
<standard-numbered-acl>
“Filtering SSH access using ACLs” on page 1001
ssh no-show-host-keys “Generating a host key pair” on page 995
ssh show-host-keys “Generating a host key pair” on page 995
Commands See ...
Commands See ...
clear statistics “Clearing sFlow statistics” on page 1135
sflow destination
<ip-addr> [<dest-udp-port>] “Specifying the collector” on page 1127
sflow enable “Enabling sFlow forwarding” on page 1130
sflow forwarding “Enabling sFlow forwarding” on page 1130
sflow polling-interval
<secs> “Changing the polling interval” on page 1127
sflow sample
<num> “Changing the default sampling rate” on page 1129
“Changing the sampling rate on a port” on
page 1129
show sflow “Displaying sFlow information” on page 1133