Configuration Guide User guide

BigIron RX Series Configuration Guide 1467
53-1002484-04
System parameters
E
System parameters
show logging “Displaying the Syslog configuration” on page 1381
terminal monitor “Enabling real-time display of Syslog messages” on
page 1380
Commands See ...
Commands See ...
banner <delimiting-character> | [motd
<delimiting-character>]
“Setting a message of the day banner” on page 130
banner exec_mode
<delimiting-character>
“Setting a privileged EXEC CLI level banner” on
page 131
banner incoming
<delimiting-character>
“Displaying a message on the console when an
incoming Telnet session is detected” on page 131
broadcast limit
<number> “Configuring CLI banners” on page 130
clock set
<hh:mm:ss> <mm-dd-yy> | <mm-dd-yyyy> “Setting the system clock” on page 128
clock summer-time “Setting the system clock” on page 128
clock timezone gmt gmt | us
<time-zone> “Setting the system clock” on page 128
hostname
<string> “Entering system administration information” on
page 120
ip telnet source-interface
ethernet
<portnum> |
loopback
<num> |
ve
<num>
“Configuring an interface as source for all Telnet
packets” on page 125
logging enable user-login “Disabling the Syslog messages and traps” on
page 124
mac-age-time
<age-time> “Changing the MAC age time” on page 139
multicast limit
<number> “Configuring CLI banners” on page 130
route-only “Enabling or disabling Layer 2 switching” on
page 137
router bgp | dvmrp | ospf | pim | rip | vrrp | vrrpe “Enabling or disabling routing protocols” on page 132
show default values “Displaying and modifying system parameter default
settings” on page 133
show logging “Examples of Syslog messages for CLI access” on
page 123
show sntp associations “Specifying a Simple Network Time Protocol (SNTP)
server” on page 127
show sntp status “Specifying a Simple Network Time Protocol (SNTP)
server” on page 127
show terminal “Checking the length of terminal displays” on
page 132
snmp-server contact
<string> “Entering system administration information” on
page 120