Configuration Guide User guide

BigIron RX Series Configuration Guide 1471
53-1002484-04
VRRP/VRRPE
E
VRRP/VRRPE
Commands See ...
activate “Configuring the owner” on page 464
“Configuring parameters specific to VRRPE” on
page 466
advertise backup “Backup hello message state and interval” on
page 469
backup [priority
<value>] [track-priority <value>] “Configuring parameters specific to VRRPE” on
page 466
“Configuring parameters specific to VRRPE” on
page 466
“Track priority” on page 470
backup-hello-interval
<value> “Backup hello message state and interval” on
page 469
clear ip vrrp-stat “Clearing VRRP or VRRPE statistics” on page 477
dead-interval
<value> “Dead interval” on page 469
hello-interval
<value> “Hello interval” on page 468
ip vrrp auth-type no-auth I
simple-text auth
<auth-data>
“Authentication type” on page 467
ip vrrp vrid
<num> “Configuring the owner” on page 464
“Configuring parameters specific to VRRPE” on
page 466
“VRRP example” on page 477
ip vrrp-extended vrid
<num> “Configuring parameters specific to VRRPE” on
page 466
“VRRPE example” on page 479
ip vrrp-extended auth-type no-auth | simple-text-auth
<auth-data>
“Configuring parameters specific to VRRPE” on
page 466
ip-address
<ip-addr> “Configuring the owner” on page 464
“VRRP example” on page 477
non-preempt-mode “Backup preempt” on page 470
owner [track-priority
<value>] “Configuring the owner” on page 464
“Track priority” on page 470
router vrrp “Configuring the owner” on page 464
“Configuring a backup” on page 465
“VRRP example” on page 477
router vrrp-extended “Configuring parameters specific to VRRPE” on
page 466
show ip vrrp | vrrp-extended
[brief | ethernet
<portnum> | ve <num> | stat]
“Displaying summary information” on page 472
“Displaying detailed information” on page 473
“Displaying statistics” on page 476
track-port ethernet
<portnum> I ve <num> “Track port” on page 469
“VRRPE example” on page 479
use-vrrp-path “Suppression of RIP advertisements on backup
routers for the backup up interface” on page 468