Configuration Guide User guide

1472 BigIron RX Series Configuration Guide
53-1002484-04
VSRP
E
VSRP
Commands See ...
backup [priority <value>] [track-priority <value>] “Configuring basic VSRP parameters” on page 435
“Changing the backup priority” on page 439
“Changing the default track priority” on page 442
enable | disable “Configuring basic VSRP parameters” on page 435
include-port ethernet
<portnum> “Adding or removing a port from the VRID’s VLAN” on
page 437
initial-ttl
<num> “Changing the Time-To-Live (TTL)” on page 440
ip-address
<ip-addr> “Configuring a VRID IP address” on page 437
ip vsrp auth-type no-auth I
simple-text auth
<auth-data>
“Configuring authentication” on page 436
non-preempt-mode “Disabling or re-enabling backup pre-emption” on
page 443
show vsrp [vrid
<num> | vlan <vlan-id>] “Displaying VRID information” on page 446
show vsrp aware “Displaying the active interfaces for a VRID” on
page 450
track-port ethernet
<portnum> I ve <num> [priority
<num>]
“Specifying a track port” on page 443
vsrp vrid
<num> “Configuring basic VSRP parameters” on page 435