Datasheet

ManualsBrandsBrocade ManualsNetworkingBR-AP065066030WW

DATA SHEET

www.brocade.com

BROCADE

MOBILITY 650

ACCESS POINT

HIGHLIGHTS

• Eliminates controller bottlenecks and

lays the foundation for 802.11ac with

Distributed AP Forwarding

• Helps reduce operational costs by

providing remote management support

with built-in remote Radio Frequency (RF)

scanning

• Delivers optimal performance with

standard Power over Ethernet (PoE)

capabilities, helping to ensure always-on

access

• Helps ensure consistent and reliable

service delivery with self-healing

capabilities

• Provides secure and preemptive client

roaming by leveraging device mobility and

24 dBm radio

• Reduces network intrusion risk with a

dedicated security sensor and continuous

monitoring of wireless networks

Multipurpose 802.11n Access Point

Reduces Mobile Access Costs

For small and medium-size enterprises,

lowering the costs of mobility capabilities

must be balanced with the need for a

secure and high-quality user experience.

As a component of the Brocade

HyperEdge

™

Architecture, the Brocade

Mobility 650 Access Point (AP), a thin

(dependent) multipurpose AP, meets all

of these needs.

The intelligent Brocade Mobility 650 uses

Distributed AP Forwarding to understand

and forward local trafc. This efcient

wireless architecture eliminates the need for

all data trafc to route to the wired network

core before reaching its destination. This

architecture is also ideal for the increased

AP bandwidth and performance demands

expected from the 802.11ac standard.

Designed to lower the cost of deploying

and operating a secure, reliable 802.11n

Wireless LAN (WLAN), this highly efcient

AP offers simultaneous WLAN access and

sensing, remote over-the-air help-desk

support, and the comprehensive, wireless

intrusion-prevention features that nimble

organizations require.

Working in conjunction with the Brocade

Mobility 650, Brocade Mobility controllers

minimize common problems—such

as building attenuation, electronic

interference, or suboptimal AP placement—

that can interfere with network availability.

Brocade Mobility controllers automatically

optimize power and channel selection

with SmartRF capabilities, so each user

receives always-on, high-quality mobile

data and service access.

CAMPUS

NETWORK

Summary of content (8 pages)

PAGE 1
www.brocade.com DATA SHEET BROCADE MOBILITY 650 ACCESS POINT CAMPUS NETWORK HIGHLIGHTS • Eliminates controller bottlenecks and lays the foundation for 802.
PAGE 2
BROCADE HYPEREDGE ARCHITECTURE The Brocade HyperEdge™ Architecture brings campus networks into the modern era to better support mobility, security, and application agility. This evolutionary architecture integrates innovative wired and wireless technologies to streamline application deployment, simplify network management, and reduce operating costs.
PAGE 3
REMOTE MANAGEMENT SUPPORT HELPS REDUCE OPERATIONAL COSTS The Brocade Mobility 650 multipurpose architecture enables IT organizations to remotely troubleshoot AP issues—as if the technician were sitting directly under the AP.
PAGE 4
BROCADE MOBILITY 650 AP SPECIFICATIONS Performance and Supported Configurations Radio options Single radio 802.11a/n or 802.11b/g/n support with 2×3 MIMO or RP-SMA antenna connectors; or dual-radio 802.11a/n and 802.
PAGE 5
BROCADE MOBILITY 650 AP SPECIFICATIONS (CONTINUED) Environmental Specifications Temperature Operating: 0°C to 50°C (–4°F to 122°F) Storage: –40°C to 70°C (–40°F to 158°F) Operating humidity 5% to 95% (without condensation) Altitude Operating: 2438 m (8000 ft) Storage: 4572 m (15,000 ft) Electrostatic discharge +/−15 kV (air), +/−8 kV (contact) Power Specifications Operating voltage 802.3af supply, 48 VDC at 12.
PAGE 6
BROCADE MOBILITY 650 AP SPECIFICATIONS (CONTINUED) Receiver Sensitivity Receiver Sensitivity (typical) at antenna housing connector (metal housing), 2400 MHz band (typical) at antenna housing connector (metal housing), 5200 MHz band Rate/MCS Mode Average sens (dBm) Rate/MCS Mode Average sens (dBm) 1 2 5.
PAGE 7
PAGE 8
www.brocade.com DATA SHEET Corporate Headquarters San Jose, CA USA T: +1-408-333-8000 info@brocade.com European Headquarters Geneva, Switzerland T: +41-22-799-56-40 emea-info@brocade.com Asia Pacific Headquarters Singapore T: +65-6538-4700 apac-info@brocade.com © 2013 Brocade Communications Systems, Inc. All Rights Reserved.