Administrator's Guide (Supporting 300, 5100, 5300, 6505, 6510, 6520, 7800, 7840, and VA-40FC) Instruction Manual

Discovery recovery (Continued)TABLE 3
Symptom Correction
You have requested automatic
address assignment in an
environment where a DHCP server is
not available.
Use the serial connection to set a reachable address.
Configuring the switch
The EZSwitchSetup switch configuration wizard steps you through the process of changing your
administrative password and zoning. You begin at the Welcome to Switch Configuration window.
FIGURE 12 Welcome to Switch Configuration window
Click Next to begin.
Configuring the switch
26 EZSwitchSetup Administrator’s Guide
53-1003129-01