Reference (Supporting Fabric OS v7.3.0) Owner manual

ManualsBrandsBrocade ManualsComputer AccessoriesFabric OS Command

1051

Table Of Contents

Fabric OS Command Reference 1021

53-1003131-01

secPolicyDump

Displays the members of one or all existing security policies.

SYNOPSIS secpolicydump ["listtype"][,"name"]

DESCRIPTION Use this command to display, without page breaks, the members of an existing policy in the active and

defined (saved) databases. When issued without operands, this command displays the members of all

security policies.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

This command can be issued from all FCS switches in the fabric.

OPERANDS This command has the following optional operands:

"listtype"

Specifies the database to display, enclosed in double quotation marks. The name

for an active database is "Active"; the name for a saved, defined database is

"Defined". If listtype is not specified, all databases are displayed.

"name"

Specifies the security policy for which to display the members. Valid values for this

operand include the following:

• DCC_POLICY_nnn

• FCS_POLICY

• SCC_POLICY

The specified policy name must be capitalized and enclosed in double quotation

marks.

The DCC_POLICY_nnn name has the common prefix DCC_POLICY_ followed by

a string of user-defined characters. These characters do not have to be capitalize.

If name is not specified, all existing policies are displayed.

EXAMPLES To display all security policy information from all databases without page breaks:

switch:admin> secpolicydump

ACTIVE POLICY SET

FCS_POLICY

Pos Primary WWN DId swName

__________________________________________________

1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs

2 No 10:00:00:60:69:30:1e:62 4 switch

____________________________________________________

DEFINED POLICY SET