Reference (Supporting Fabric OS v7.3.0) Owner manual

Fabric OS Command Reference 1029
53-1003131-01
secPolicyShow
2
secPolicyShow
Displays an existing security policy including the FCS policy.
SYNOPSIS secpolicyshow ["policy_set"[", name"]]
DESCRIPTION Use this command to display the members of an existing policy in the Active or Defined security policy
set. The command can be issued from all FCS switches.
This command displays the policy database one page at a time. Use the secPolicyDump command to
display the policy database without page breaks.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
"policy_type"
Specify which policy to display, in quotation marks. Valid values are "Active",
"Defined", or an asterisk (*) for both Active and Defined. This operand is optional.
If not specified, all databases are displayed.
"name"
Specify the name of the security policy you want to view, in quotation marks. The
specified policy name must be capitalized. This operand is optional. Valid values
for this operand include the following:
• DCC_POLICY_nnn
• FCS_POLICY
• SCC_POLICY
The DCC_POLICY_nnn name has the common prefix DCC_POLICY_ followed by
a string of user-defined characters. These characters do not have to be
capitalized like regular policy names, but they are case-sensitive.
EXAMPLES To display all security policies from active databases:
switch:admin> secpolicyshow "active"
___________________________________________________
ACTIVE POLICY SE
FCS_POLICY
Pos Primary WWN DId swName
__________________________________________________
1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs
2 No 10:00:00:60:69:30:1e:62 4 switch
____________________________________________________