Reference (Supporting Fabric OS v7.3.0) Owner manual

Fabric OS Command Reference 1207
53-1003131-01
zone
2
To add the option to disable failover for a TI zone:
switch:admin> zone --add -o n purplezone
To add the option to enable failover for a TI zone:
switch:admin> zone --add -o f greenzone" -p "3,4"
To remove portlist members from an existing TI zone.
switch:admin> zone --remove bluezone -p "3,4; 3,6"
To activate the TI zone "bluezone":
switch:admin> zone --activate bluezone
To deactivate the TI zone "purplezone":
switch:admin> zone --deactivate purplezone
To delete the TI zone "bluezone":
switch:admin> zone --delete bluezone
To display all TI zones in the defined configuration:
switch:admin> zone --show
Defined TI zone configuration:
TI Zone Name: ti_blue
Port List: 4,55; 10:00:00:00:00:01:00:01; \
10:00:00:00:00:01:00:04; 3,9
Configured Status: Activated / Failover-Disabled
Enabled Status: Deactivated
TI Zone Name: ti_red
Port List: 4,4; 5,5; 3,3
Configured Status: Activated / Failover-Enabled
Enabled Status: Activated / Failover-Enabled
To display all TI zones in the defined configuration in ascending order:
switch:admin> zone --show -ascending
Defined TI zone configuration:
TI Zone Name: ti_blue
Port List: 10:00:00:00:00:01:00:01; \
10:00:00:00:00:01:00:04; 3,9; 4,55
Configured Status: Activated / Failover-Disabled
Enabled Status: Deactivated
TI Zone Name: ti_red
Port List: 3,3; 4,4; 5,5
Configured Status: Activated / Failover-Enabled
Enabled Status: Activated / Failover-Enabled