Reference (Supporting Fabric OS v7.3.0) Owner manual

336 Fabric OS Command Reference
53-1003131-01
fcrConfigure
2
After you identify the FCIP links between FC Routers for all fabrics and updated
the cost of all FCIP links, enable the shortest IFL mode in all the FC Routers in the
backbone fabric using this option. If the FCIP link is the only available path from
the source to the destination edge fabric, then traffic will flow through that FCIP
link only.
--disable -shortestifl
Disables the shortest IFL mode in FC Router.
--add -alias Alias_name -fid FID
Adds the alias name to the specific FID.
--delete -alias [FID | -all]
Deletes a specific FID alias association or all FID alias associations.
--show [-alias]
Shows the current Backbone Fabric ID with the associated alias name and the
status of the shortest IFL mode as enabled or disabled.
--help
Displays the command usage.
EXAMPLES To configure FC Router parameters:
fcr:admin> fcrconfigure --bbfid
Backbone fabric ID parameter set. <cr> to skip this parameter
Please make sure new Backbone Fabric ID does \
not conflict with any configured EX-Port's Fabric ID
Backbone fabric ID: (1-128)[128]32
To enable shortest IFL mode:
fcr:admin> fcrconfigure --enable -shortestifl
Shortest IFL path is enabled.
To disable shortest IFL mode:
fcr:admin> fcrconfigure --disable -shortestifl
Shortest IFL path is disabled
To display the current configuration:
fcr:admin> fcrconfigure --show
Backbone fabric ID: 32
Shortest IFL feature is disabled
To assign a name to a FID:
fcr:admin> fcrconfigure --add -alias Red_fabric -fid 10
To display a name associated to a FID:
fcr:admin> fcrconfigure --show -alias
FIDAlias
=======================
10Red_fabric
To delete the name of a FID:
fcr:admin> fcrconfigure --delete -alias 10
SEE ALSO fosConfig, portCfgEXPort, switchDisable, switchEnable, switchShow, linkCost