Reference (Supporting Fabric OS v7.3.0) Owner manual

Fabric OS Command Reference 657
53-1003131-01
pdShow
2
pdShow
Displays data from a panic dump file.
SYNOPSIS pdshow [panic_dump_file]
DESCRIPTION Use this command to display data from a panic dump file. The panic dump file contains information that
might be useful to determine the cause of the system panic.
When executed without any arguments, this command displays output from the latest panic dump file
available on the switch.
If a panic dump file is specified as an argument, the contents of that specific file are displayed.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following optional operand:
panic_dump_file
Specify the full path name of a panic dump file.
EXAMPLES To examine a panic dump file by the name panic_dump located under the directory /tmp:
switch:admin> pdshow /tmp/panic_dump
*** CAUTION ***
* Host PLATFORM (current) is: 'Unknown'
* PLATFORM got from pd file is: 'SW12000'
* Some results shown may be incorrect and/or missing
* It is best if this command is run on same \
PLATFORM as that of pdfile
**************
_______________________********________________________
* File :/core_files/panic/core.pd1038932352 *
* SECTION:PD_MISC *
-----------------------********------------------------
WatchDogRegister=0x0
Section=Startup time: Tue Dec 3 16:06:11 UTC 2002
Kernel= 2.4.19
Fabric OS= v4.1.0_j_dist_1103
Made on= Tue Dec 3 19:07:13 2002
Flash= Tue Dec 3 13:19:06 2002
BootProm= 3.2.0
Section=HA show Output
(output truncated)
SEE ALSO portLogDump, supportSave