Reference (Supporting Fabric OS v7.3.0) Owner manual

Fabric OS Command Reference 927
53-1003131-01
portShow
2
TAPE Yes 00F0 0x150D3FDD Y Y 2 0 2 02 000D
UNKN No 00F0 0x15CDB71F Y Y 2 0 1 02 000D
DISK Yes 00F2 0x1538206F Y Y 2 0 4 02 0007
DISK Yes 00F2 0x15E44F2E Y Y 2 0 1 02 0007
UNKN No 00F2 0x159C196E Y Y 2 0 3 02 0007
UNKN No 00F2 0x152D3BA3 Y Y 2 0 3 02 0007
UNKN No 00F2 0x15F154E2 Y Y 2 0 4 02 0007
UNKN No 00F2 0x1595E521 Y Y 2 0 4 02 0007
UNKN No 00F2 0x15498A60 Y Y 2 0 3 02 0007
UNKN No 00F2 0x155C86A7 Y Y 2 0 1 02 0007
UNKN No 00F2 0x1580E9E6 Y Y 2 0 1 02 0007
UNKN No 00F2 0x15E45825 Y Y 2 0 3 02 0007
(output split and truncated)
To reset the Device Path Block statistics:
switch:admin> portshow xtun 16 -ficon -fdpb -clear
To display a FICON Teradata, Tape, or XRC emulation statistics for a specified Device Control Block:
switch:admin> portshow xtun 16 -ficon -fdcb 0x041008B980
FDCB (FICON Device Control Block):Port=10 Side=Host Active=No
DeviceType=TERA
-------------------------------------------------------------
FDCB
(0x) hDom hPrt dDom dPrt lch lcu dev state
============ ==== ==== ==== ==== ==== ==== ==== =====
0x041008B980 63 04 64 02 02 08 03 0x00
CONTROL
=======
active = No Send_SYR = No crrSet = No
xrcEstablished = No sssSet = No dvcAckEmulInProg = No
discardIgrFrames= No resetEmulPending = No interceptLack = No
interceptLack2 = No onStartPendingQueue= No discardEgrFrames = No
deferDeviceType = No emulBaAcceptPending= No mappingOxid = No
xrcEmulEnable = Yes tapeWriteEmulEnable= Yes tapeReadEmulEnabled= Yes
dvcAckEmulEnable= Yes fdcbLocked = Yes vtnValid = Yes
fcrPresent = No deviceNotInstalled = No onCuBusyQueue = No
egressParmsSet = Yes statusFlags = 0x4000
QUEUE COUNTS
====================
fcEgressQueue = 0 egressQMax = 0
ficonRetryQueue = 0 retryQMax = 0
cmdHdrQueue = 0 cmdHdrQMax = 32
MISC (hex)
==========
state = 0x00 prevState = 0x18 lastStateArray= 0x1C371415
statusFlags = 0x4000
errorCode = 0x00 ingressOxid = 0xFFFF
egressOxid = 0xFFFF allocatedOxid= 0xFFFF unsolIngrOxid = 0xFFFF
lastStatus = 0x0C lastCmd = 0x00 tokenFlags = 0x00
lastCmdArray= 0x773E3E64 lastStsArray= 0x08040C0Cl \
astXprtArray=0x08040C0C
lastSeqId = 0x00 curSeqId = 0xB1
lastXportEmulMsg = 0x4F statusFctlHi = 0x18 curIuCnt = 0x0001
token = 0x00000000
endingChOxid = 0xFFFF endingCuOxid= 0xFFFF