Reference (Supporting Fabric OS v7.3.0) Owner manual

320 Fabric OS Message Reference
53-1003140-01
ESM-1003
5
ESM-1003
Message ESMd uninitialization called for service <Service Name>:<Instance Number>.
Message Type LOG
Severity INFO
Probable Cause Indicates that ESMd service uninitialization phase has completed.
Recommended
Action
No action is required.
ESM-1004
Message ESMd failed to initialize <Module Name> rc:<Return Code>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified module has failed to initialize.
Recommended
Action
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
ESM-1005
Message Configuration (<Configuration>) replay failed - <Failure Reason>.
Message Type LOG
Severity ERROR
Probable Cause Indicates the specified configuration failed to be reapplied during config replay.
Recommended
Action
Use the portCfg, portShow, and portCfgShow commands to correct the cause of the failure.
ESM-1010
Message DP<DP ID> is OFFLINE.
Message Type LOG
Severity INFO
Probable Cause Indicates that the specified Data Processor (DP) has went offline.