Reference (Supporting Fabric OS v7.3.0) Owner manual

Fabric OS Message Reference 613
53-1003140-01
HSL-1003
5
HSL-1003
Message SFP for interface <InterfaceName> is removed.
Message Type LOG
Severity INFO
Probable Cause Indicates that a small form-factor pluggable (SFP) transceiver has been removed from the specified
interface.
Recommended
Action
No action is required.
HSL-1004
Message Incompatible SFP for interface <InterfaceName> is detected.
Message Type LOG
Severity ERROR
Probable Cause Indicates that an incompatible small form-factor pluggable (SFP) transceiver for the interface has been
inserted.
Recommended
Action
Disable the interface using the shutdown command and insert an SFP transceiver that is supported on
the interface. After the SFP transceiver is inserted, re-enable the interface using the no shutdown
command.
HSL-1005
Message Failed to initialize with FSS.
Message Type LOG
Severity CRITICAL
Probable Cause Indicates a failure to initialize the Fabric OS State Synchronization (FSS) service. This error is caused by
other system errors.
Recommended
Action
Execute the errShow command to view the error log for other system errors, and take appropriate
corrective actions.