Reference (Supporting Fabric OS v7.3.0) Owner manual

816 Fabric OS Message Reference
53-1003140-01
SEC-3001
5
SEC-3001
Message Event: <Event Name>, Status: success, Info: Security mode <State change: Enabled
or Disabled> on the fabric.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates the security mode of the fabric was either enabled or disabled.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3002
Message Event: <Event Name>, Status: success, Info: <Event Related Info>.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates the specified security event has occurred. The event can be one of the following:
There has been a fabric configuration server (FCS) failover.
A security policy has been activated.
A security policy has been saved.
A security policy has been aborted.
A non-FCS password has changed.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3003
Message Event: <Event Name>, Status: success, Info: Created <Policy Name> policy, with
member(s) <Member List> .
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates a new security policy with entries has been created. When you use a wildcard (for example, an
asterisk) in creating a policy, the audit report displays the wildcard in the event information field.