Administrators Guide (Supporting Fabric OS v7.3.0) User Manual

• RFC1158-MIB
• RFC-1212
• RFC1213-MIB
• RFC-1215
• RMON-MIB
• RSTP-MIB
• SNMP-COMMUNITY-MIB
• SNMP-FRAMEWORK-MIB
• SNMPv2-CONF
• SNMPv2-MIB
• SNMPv2-PARTY-MIB
• SNMPv2-SMI-MIB
• SNMPv2-TC
• SNMP-VIEW-BASED-ACM-MIB
• SNMP-USER-BASED-SM-MIB
• SNMP-TARGET-MIB
• T11-FC-ZONE-SERVER-MIB
MIB loading order
Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the IMPORTS
section near the top of the MIB. When loading the Brocade MIBs, refer to the following table to ensure
any MIB dependencies are loading in the correct order.
NOTE
Before loading Brocade MIB files, ensure that you have the correct version of SNMP for your Fabric OS
version. All versions of Fabric OS support SNMPv1 and SNMPv3. SNMPv2 is not supported on Fabric
OS v6.1.2_CEE and later versions.
Brocade SNMP MIB dependenciesTABLE 32
MIB Name Dependencies
BRCD_REG.mib RFC1155-SMI
BRCD_TC.mib Brocade-REG-MIB
SNMPv2-TC
SNMPv2-SMI
FC-MGMT-MIB SNMPv2-SMI
SNMPv2-CONF
SNMPv2-MIB
IANAifType-MIB
SNMPv2-TC
IF-MIB
SNMP-FRAMEWORK-MIB
MIB loading order
Fabric OS Administrators Guide 191
53-1003130-01