Configuration Guide Owner manual

FIGURE 79 Use virtual routing interfaces for routing between Layer 3 protocol VLANs
VLAN and virtual routing interface groups
Brocade FastIron devices support the configuration of VLAN groups. To simplify configuration, you can
configure VLAN groups and virtual routing interface groups. When you create a VLAN group, the
VLAN parameters you configure for the group apply to all the VLANs within the group. Additionally,
you can easily associate the same IP subnet interface with all the VLANs in a group by configuring a
virtual routing interface group with the same ID as the VLAN group.
VLAN and virtual routing interface groups
366 FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide
53-1003086-04