Manual

no qos scheduler-profile user-profile-name
Command Default
A user scheduler profile is not configured.
Parameters
user-profile-name
Specifies the name of the scheduler profile to be configured.
mechanism scheduling-mechanism
Configures the queue assignment with the specified scheduling mechanism . The following
scheduling mechanisms are supported:
mixed-sp-wrr
Specifies mixed strict-priority (SP) and weighted scheduling.
strict
Specifies SP scheduling.
weighted
Specifies weighted scheduling.
profile qosp0-7
Configures the profile based on classification in the range 0 to 7.
wt0-7
Specifies the bandwidth percentage for the corresponding QoS profile. The range is 0 to 7.
Modes
Global configuration mode
Usage Guidelines
The no form of this command removes the scheduler profile configuration.
You can use the scheduler-profile command to attach a user scheduler profile to a port. If you want to
remove a scheduler-profile, you must ensure that it is not attached to any port.
The default qos-profile weights for each queue using a weighted QoS mechanism are as follows:
Profile Priority Weighted Bandwidth
Profile qosp7 Priority7(Highest) Bandwidth requested 44% calculated 44%
Profile qosp6 Priority6 Bandwidth requested 8% calculated 8%
Profile qosp5 Priority5 Bandwidth requested 8% calculated 8%
Profile qosp4 Priority4 Bandwidth requested 8% calculated 8%
Profile qosp3 Priority3 Bandwidth requested 8% calculated 8%
Profile qos2 Priority2 Bandwidth requested 8% calculated 8%
Profile qosp1 Priority1 Bandwidth requested 8% calculated 8%
Profile qosp0 Priority0 (Lowest) Bandwidth requested 8% calculated 8%
Per-queue Details Bandwidth Percentage
Class 0 3
Traffic Management Commands
88 FastIron Ethernet Switch Traffic Management Guide
53-1003093-03