53-1003089-02 19 February 2014 FastIron Ethernet Switch Software Upgrade Guide Supporting FastIron Software Release 08.0.
© 2014, Brocade Communications Systems, Inc. All Rights Reserved. Brocade, the B-wing symbol, Brocade Assurance, ADX, AnyIO, DCX, Fabric OS, FastIron, HyperEdge, ICX, MLX, MyBrocade, NetIron, OpenScript, VCS, VDX, and Vyatta are registered trademarks, and The Effortless Network and the On-Demand Data Center are trademarks of Brocade Communications Systems, Inc., in the United States and in other countries. Other brands and product names mentioned may be trademarks of others.
Contents Preface..................................................................................................................................... 3 Document conventions......................................................................................3 Text formatting conventions.................................................................. 3 Command syntax conventions.............................................................. 3 Notes, cautions, and warnings....................................
Software recovery on ICX 6430, ICX 6450, ICX 6650, ICX 7750, and FSX devices...............................................................
Preface ● Document conventions......................................................................................................3 ● Brocade resources............................................................................................................ 5 ● Getting technical help........................................................................................................5 ● Document feedback...................................................................................................
Notes, cautions, and warnings Convention Description value In Fibre Channel products, a fixed value provided as input to a command option is printed in plain text, for example, --show WWN. [] Syntax components displayed within square brackets are optional. Default responses to system prompts are enclosed in square brackets. {x|y|z} A choice of required parameters is enclosed in curly brackets separated by vertical bars. You must select one of the options.
Brocade resources Brocade resources Visit the Brocade website to locate related documentation for your product and additional Brocade resources. You can download additional publications supporting your product at www.brocade.com. • • Adapter documentation is available on the Downloads and Documentation for Brocade Adapters page. Select your platform and scroll down to the Documentation section.
Document feedback Document feedback To send feedback and report errors in the documentation you can use the feedback form posted with the document or you can e-mail the documentation team. Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and completeness of this document. However, if you find an error or an omission, or you think that a topic needs further development, we want to hear from you.
About This Guide ● Introduction....................................................................................................................... 7 ● Audience........................................................................................................................... 8 ● What’s new in this document............................................................................................ 8 ● Related publications.............................................................................
Audience Audience This document is designed for network engineers with a working knowledge of Layer 2 and Layer 3 switching and routing. If you are using a Brocade Layer 3 Switch, you should be familiar with the following protocols if applicable to your network - IP, RIP, OSPF, BGP, ISIS, IGMP, PIM, DVMRP, and VRRP. What’s new in this document This document is updated for FastIron software release 08.0.10a.
Upgrade and downgrade considerations ● Upgrade and downgrade considerations.......................................................................... 9 ● Changes between FastIron 07.4.00 and 08.0.xx release................................................11 ● Changes between FastIron 07.5.00 and 08.0.01 release............................................... 26 This chapter contains the upgrade and downgrade considerations, and the major differences between FastIron 07.4.00 and 08.0.xx releases.
Considerations for devices with LAG • • ICX 6430 devices can hold two Layer 2 images. All FastIron devices except ICX 6430 can hold two Layer 2 or Layer 3 images. Security • • • • SSHv2 RSA host key format is different between FastIron 07.x.xx, and 08.0.xx software versions. When you upgrade from FastIron 07.x.xx, 08.0.00 to 08.0.xx software version, if RSA key is present in FastIron 07.x.xx or 08.0.00 software version, same size will be regenerated in FastIron 08.0.xx software version.
Considerations for devices in stack configurations • • interfaces (without key) will be bundled as one misconfigured LAG. The configuration will fail if it exceeds the supported maximum number of members per LAG limit. All LAG configurations are lost during downgrade. The trunk configuration commands--trunk ethernet , trunk deploy, trunk-cfg-ind , linkaggregation active | passive , link-aggregation conf key --are deprecated. Instead, you can use the new LAG configuration commands.
New or modified parameter values The FastIron 08.0.xx release newly supports BGP4+(IPv6), IPv6 Multicast, Management VRF, and Multi-VRF. There are also changes to BGP4 (IPv4), OSPFv2, OSPFv3, RIP, RIPng, and IP Multicast. While some of these protocols are new to the FastIron family, some have been supported since Layer 3 routing has been supported. There are changes in the implementation to have a more unified CLI and approach across the entire IP product portfolio.
BGP parameter default values TABLE 2 Changes in multicast parameter values (Continued) Parameter Device FastIron 08.0.xx(minimum/ maximum/default) FastIron 07.4.00(minimum/maximum/ default) FCX 1/8192/4096 256/8192/4096 ICX 6610 1/8192/4096 256/8192/4096 SX Gen2 1/8192/4096 256/8192/4096 SX Gen3 1/8192/4096 256/8192/4096 FCX 256/6144/1024 256/4096/1024 ICX 6610 256/6144/1024 256/4096/1024 SX Gen3 256/6144/1024 256/4096/1024 FCX 1024/8192/4096 Not supported in FastIron 07.4.
Command changes TABLE 3 Changes in BGP, BGP4+, and Route Maps defaults (Continued) Parameter FastIron 08.0.xx FastIron 07.4.00 Note Default behavior for invalid confederation as path Ignore Not ignored Not configurable. Minimal route advertisement interval 0 30 Configurable. Maximum router advertisement interval 3600 sec 600 sec Configurable. Update time 0 - 30 sec 1 - 30 sec Configures iBGP route update interval.
Upgrade and downgrade considerations TABLE 4 New OSPFv2 commands (Continued) Command Note cost (area decimal range advertise sub- Configures area range cost for Advertise this type-3 summarization. command) cost (area decimal range not-advertise sub- Configures the area range cost for Not Advertise this type-3 summarization. command) Interface level command [no] active Configures Active information. FastIron 07.4.00 behavior was always active.
Upgrade and downgrade considerations TABLE 5 Modified OSPFv2 commands (Continued) FastIron 08.0.xx FastIron 07.4.00 [no] timers throttle spf timers spf delay hold-time FastIron 07.4.00: delay hold-time max-hold Note delay corresponds to delay between receiving a change to SPF calculation. The valid range is 0 to 65535. hold-time corresponds to hold time between consecutive SPF calculations. The valid range is 0 to 65535. FastIron 08.0.
OSPFv3 TABLE 6 Deprecated OSPFv2 commands Command Note Global level commands (router OSPF and sub-commands) RFC 1583-type3-cost If RFC 1583-compatibility is configured, sets the cost for advertised type 3 summary LSAs to the smallest cost of any of the component networks in FastIron 08.0.xx. Show command show ip ospf error Displays OSPF warnings and errors. show growable pool info Displays growable pool information. Clear command clear ip ospf area Clears OSPF area.
RIP TABLE 7 New OSPFv3 commands (Continued) Command Note Interface level commands [no] active Sets active status. FastIron 07.4.00 behavior was always active. [no] hello-jitter Configures jitter between HELLO packets, in percentage. [no] suppress-linklsa Suppresses link LSA advertisements. Show command show ipv6 ospf summary Displays summary of IPv6 OSPF instances. show ipv6 ospf vrf Displays IPv6 OSPF information for a VRF or all VRF interfaces.
BGP and Route-Map TABLE 10 Modified RIP commands FastIron 08.0.xx FastIron 07.4.00 Note Global level command (router RIP and sub-command) [no] redistribute connected | bgp | ospf | static [metric value | route-map name] [no] redistribution Redistributes routes from other routing protocols. [no] prefix-list name in | out filter filter-num permit | deny source-ip-address | any sourcemask | any [log] Specifies the prefix list as route map to filter out specific routes.
Upgrade and downgrade considerations TABLE 12 Modified BGP commands (Continued) FastIron 08.0.xx FastIron 07.4.00 Note clear ip bgp flap-statistics clear ip bgp flap-statistics aspath-filter list-num The as-path-filter option is removed because flap statistics do not have aspath-filter option anymore. TABLE 13 Deprecated BGP and Route-Map commands Command Note Global level command [no] set mirror-interface int-num Sets a mirror interface for route maps.
ARP TABLE 13 Deprecated BGP and Route-Map commands (Continued) Command Note [no] set nlri [multicast | unicast] Configures the route map set rule with multicast or unicast NLRI. [no] neighbor peer-group update-source pos Configures the router to communicate with a neighbor through specified interface. interface ARP TABLE 14 Modified ARP commands FastIron 08.0.xx FastIron 07.4.
IGMP (L3 Routing) TABLE 17 Modified MLD-Snooping commands (Continued) FastIron 08.0.xx FastIron 07.4.00 Note [no] system-max mldsnoop-group-addr num [no] system-max mldmax-group-addr num Sets the maximum limit for the MLD group records. mld-snooping Configures MLD snooping on a particular VLAN. This command is now consistent with IGMP snooping command. show ipv6 mld-snooping Shows MLD snooping related information. This command is now consistent with IGMP snooping command.
PIM TABLE 19 Modified IGMP L3 routing commands (Continued) FastIron 08.0.xx FastIron 07.4.00 Note [no] ip igmp static-group group-addr [ethernet ...] [no] ip igmp static-group group-addr [count num] [ethernet ...] Configures a static member of an IGMP group. In FastIron 08.0.xx, it does not support specifying multiple contiguous static groups using "count" option. PIM TABLE 20 New PIM commands Command Note ipv6 pimsm-snooping Enables PIM6 SM snooping globally.
Upgrade and downgrade considerations TABLE 21 Modified PIM commands (Continued) FastIron 08.0.xx FastIron 07.4.00 Note [no] message-interval [no] message-interval seconds seconds Configures PIM prune wait timer. The allowed range has been changed from [1-65535] seconds to [10-65535] seconds.
Network Management TABLE 22 Deprecated PIM commands (Continued) Command Note [no] ip pim ttl-threshold ttl Configures Multicast TTL-threshold on a particular interface. This feature was never supported in FastIron even though the command was available. TTL threshold value of 1 was used internally. The behavior is same in FastIron 08.0.00. ip-multicast-disable Disables multicast routing and snooping on this particular interface or list of ports within a virtual interface.
Changes between FastIron 07.5.00 and 08.0.01 release TABLE 23 New network management commands (Continued) Command Note show running-config vlan vlanid Shows the information on a VLAN ID in the running configuration. TABLE 24 Deprecated network management commands Command Note show cpu-utilization detail Shows the CPU utilization rate in detail. show rmon statistics unit Shows the RMON Ethernet statistics table.
Software Upgrade and Downgrade ● Software upgrade overview.............................................................................................27 ● Initial steps...................................................................................................................... 27 ● Upgrade process.............................................................................................................30 ● Downgrade process.........................................................................
Sample output - determining the software versions NOTE Please note that in this section the output is truncated only relevant portion of the output is displayed. For detailed output, see the Sample output - determining the software versions on page 28 section. 1. Determine the current boot image version using the show flash command Brocade#show flash Active Management Module (Slot 9): Compressed Pri Code size = 3613675, Version 03.1.00aT3e3 (sxr03100a.bin) Compressed Sec Code size = 2250218, Version 03.1.
Example for determining the boot image versions 512 MB DRAM STACKID 1 system uptime is 3 minutes 39 seconds The system : started=warm start reloaded=by "reload" The version information is shown in bold type in this example: • • • • "07.4.00T311" indicates the flash code version number. The "T311" is used by Brocade for record keeping. "labeled as ICX64S07400" indicates the flash code image label. The label indicates the image type and version and is especially useful if you change the image file name.
Upgrade process Upgrade process FastIron 08.0.xx release introduces several new features and enhancements across all FastIron products. Before upgrading the software on the device, see Upgrade and downgrade considerations on page 9. NOTE If you are upgrading from the 08.0.00a or higher software version, you can upgrade using a manifest file. It provides a simplified upgrade mechanism especially for units in a stack. For details, see Upgrade using a manifest file on page 31.
Software upgrade from 07.5.xx to 08.0.01 1. Check if the current installed management module supports the 08.0.xx software version. If not supported, uninstall the management module and install the supported management module. For information on installing a management module in FSX, see the Brocade FastIron SX Series Chassis Hardware Installation Guide. 2. If you have installed a management module factory-loaded with the required software version, skip the next step as the upgrade is complete. 3.
Software Upgrade and Downgrade 1. Unzip the downloaded FastIron image files on the TFTP server. This will place the manifest file at the top of the directory structure with the images in sub directories. Ensure that the Brocade device has access to the TFTP server. 2. If upgrading from 08.0.00x, delete the following lines from the manifest text file. -DIRECTORY /RP/Boot fxz08001b007.bin -DIRECTORY /RP/Images ICXS08001q033.bin ICXR08001q033.bin -DIRECTORY /RP/Signatures fxz08001b007.sig ICXS08001q033.
Example of manifest file upgrade For example: Brocade # copy tftp system-manifest 192.168.10.12 manifest.txt primary You can use the all-images-primary and all-images-secondary options to copy all the images. NOTE Copying manifest file using SCP is not supported. NOTE For standalone devices or homogenous stack, the manifest upgrade process will download the boot image to the device only if a newer boot image version is available for upgrade.
Downgrade process .................................................................PLEASE WAIT. MEMBERS SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER DOWN THE UNIT.... Copy ICX6450 from TFTP to Flash Done Brocade#Flash Memory Write (8192 bytes per dot) Automatic copy to member units: 3 4 5 7 8 . DOWNLOAD OF ICX6450 BOOT SIGNATURE Done Brocade#Load to buffer (8192 bytes per dot) Automatic copy to member units: 3 4 5 7 8 ..................................................................................
Software downgrade on FSX devices NOTE If you are downgrading an ICX 6650 device from 08.0.01 to 07.5.xx, see Software downgrade from 08.0.01 to 07.5.xx on page 35 NOTE For downgrade of ICX 6610, ICX 6430, ICX 6450, and FCX devices, it is not mandatory to load an earlier version of the boot code. Software downgrade on FSX devices On the FastIron SX series devices, the old management module does not support 08.0.xx software version.
Loading images on the device Loading images on the device Any software upgrade or downgrade require you to copy the downloaded images on to the device and load the new image on the device. You need to load the boot code and flash code on the device. Load the boot code You can load the boot code using either TFTP or SCP as described in the following sections: NOTE For upgrading 07.3.00f to 08.0.xx and 08.0.00a to 08.0.
Load the boot code using SCP Load the boot code using SCP 1. Place the new boot code on a SCP-enabled host to which the Brocade device has access. 2. If the device has only 8 MB of flash memory or if you want to install a full Layer 3 image, delete both the primary and secondary image using the erase flash command. 3. Enter the following command to copy the boot code from the SCP-enabled host into flash memory: pscp image-file-name hostname@management-ip:flash:bootrom For example: C:\> pscp grz07302.
Load the flash code using SCP ....................................................................... ....................... TFTP to Flash Done. 4. Verify the flash image version by using the show flash command at any level of the CLI. NOTE When upgrading the flash image version, the image is automatically updated across all stack units. For other devices, when upgrading from one major release to another (for example, from software release 07.1.00 to 07.2.
Software recovery NOTE On ICX 6430 and ICX 6450 devices, you can use the same syntax as FCX devices. However, after the copy operation is completed at the host, you do not get the command prompt back because the device is synchronizing the image to flash. To ensure that you have successfully copied the file, issue the show flash command. If the copy operation is not complete, the show flash command output will show the partition (primary or secondary) as EMPTY. 4.
Software recovery on ICX 6430, ICX 6450, ICX 6650, ICX 7750, and FSX devices BOOT INFO: Become active CPU module M2 BI Boot Code Version 07.06.05 Enter 'b' to go to boot monitor ... BOOT MONITOR> 5. Set a temporary IP address of the same subnet as the TFTP server NIC, for the device management port using the ip address command. For example: BOOT MONITOR> ip address 10.10.10.2/24 BOOT INFO: set ip addr to 10.10.10.2, ip mask to 255.255.255.000 6.
Software Upgrade and Downgrade 3. On the TFTP server, assign an IP address to the connected NIC. For example, IP address 10.10.10.21 mask 255.255.255.0. 4. Reboot the device and go to the boot monitor mode by pressing "b ". 5. When in boot mode, enter the printenv command to display details of the images available on the device memory. For example: ICX64XX-boot> printenv baudrate=9600 uboot=/foundry/FGS/bootcode/kxz07400.bin ver=07.4.00T310 (Mar 1 2012 - 11:28:23) 6.
Software Upgrade and Downgrade ################################################################# ######################################################## done Bytes transferred = 10360844 (9e180c hex) prot off f8100000 f907ffff ................................................................................ ................................................................................ ................................................................................ ........
show command output differences between 07.4.00 and 08.0.xx release There are differences in several show command outputs between FastIron 07.4.00 and 08.0.xx release. This section provides more information about the show command output changes. 07.4.00 CLI 08.0.xx Output Comments show ip ospf database externallink-state advertise 2 Brocade#sh ip ospf database external-link-state advertise 1 The output display includes the "Fwd Address" and "Sync State" fields.
show command output differences between 07.4.00 and 08.0.xx show ip ospf database externallink-state router-id 1.2.3.4 Brocade#sh ip ospf database external-link-state router-id 192.168.98.190 The output display Ospf ext link-state by router ID 192.168.98.190 are in the following: includes the "Fwd Address" and Type-5 AS External Link States "Sync State" fields.
show command output differences between 07.4.00 and 08.0.xx show ip ospf interface ? show ip ospf interface 1.2.3.4 Brocade#sh ip ospf interface e 2/3/1 admin down, oper down, ospf enabled, state down IP Address 192.213.112.213, Area 0.0.0.200 Database Filter: Not Configured State down, Pri 1, Cost 1, Options 2, Type broadcast Events 0 Timers(sec): Transmit 1, Retrans 5, Hello 10, Dead 40 DR: Router ID 0.0.0.0 Interface Address 0.0.0.0 BDR: Router ID 0.0.0.0 Interface Address 0.0.0.
show command output differences between 07.4.00 and 08.0.xx show snmp group Brocade#show snmp group groupname = admingrp security model = v3 security level = authNoPriv ACL id = 0 readview = all writeview = all The output display does not include the "notifyview = all" field. show ip ospf database link-state ? Brocade#sh ip ospf database link-state Link States The output display includes the "Sync State" field. Index Area ID Cksum SyncState 1 0.0.0.200 0xafbc Done 2 0.0.0.200 0xb281 Done 3 0.0.0.
show command output differences between 07.4.00 and 08.0.xx show ip ospf borderrouters ? Brocade#sh ip ospf border-routers router ID router type Area 1 192.168.98.111 ABR 0.0.0.200 1 192.168.98.111 ABR 0.0.0.200 1 192.168.98.112 ABR 0.0.0.200 1 192.168.98.112 ABR 0.0.0.200 1 192.168.98.113 ABR 0.0.0.200 1 192.168.98.113 ABR 0.0.0.200 1 192.168.98.113 ABR 1 192.168.98.111 ABR 1 192.168.98.111 ABR 1 192.168.98.112 ABR 1 192.168.98.112 ABR 1 192.168.98.190 ASBR 1 192.168.98.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.xx show ipv6 Brocade#show ipv6 vrrp-extended vrrpbrief Summary extended ? ethernet Ethernet port stat Status statistics VRRP/VRRP-E packet counts ve Virtual Ethernet port vrid Virtual router ID | Output modifiers The new Hello TX statistics packet counts is added in the output. show arp macaddress ? Brocade#show arp mac-address HHHH.HHHH.HHHH MAC address in xxxx.xxxx.xxxx | pipe and removed from output.
show command output differences between 07.4.00 and 08.0.xx show ipv6 route 2000:5678: 90ab:cdef: 0123:4567: 890a:bcde/ 64debug Brocade#show ipv6 route 2000:5:5:5::5/64 deb Type Codes - B:BGP C:Connected I:ISIS L:Local O:OSPF R:RIP S:Static BGP Codes - i:iBGP e:eBGP OSPF Codes - i:Inter Area 1:External Type 1 2:External Type 2 Type IPv6 Prefix Next Hop Router Interface Dis/Metric Uptime C 2000:5:5:5::/64 :: loopback 5 0/0 5d18h The output is modified.
show command output differences between 07.4.00 and 08.0.xx show ip pim interface STR ? Explanation for options "ethernet" and "loopback" added in help. Brocade#sh ip pim interface ethernet Ethernet port loopback Loopback port tunnel Tunnel Interface ve Virtual port | Output modifiers Brocade# Brocade#sh ip pim vrf white interface ethernet Ethernet port loopback Loopback port tunnel Tunnel Interface ve Virtual port | Output modifiers Brocade# show ip Brocade#show ip pim mc 226.0.0.
show command output differences between 07.4.00 and 08.0.xx show ip pim mcache 1.2.3.4 1.2.3.4 Brocade#show ip pim mc 90.1.1.32 226.0.0.201 More detailed IP Multicast Mcache Table explanation Entry Flags : SM - Sparse Mode, SSM - Source Specific Multicast, DM provided for the Dense Mode acronyms in the RPT - RPT Bit, SPT - SPT Bit, LSRC - Local Source, output.
show command output differences between 07.4.00 and 08.0.xx show ip pim flowcache 1.2.3.
show command output differences between 07.4.00 and 08.0.xx show ip pim resource show ip pim group show ip bgp peergroup STR PIM IPV4 CLASS VRF category, ITC, etc. are added.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.xx Brocade#show ipv6 debug RTM6 class for RTM Class for vrf default-vrf/0, safi 0, route_update 0 VRF is displayed.
show command output differences between 07.4.00 and 08.0.xx show ip Brocade# sh ip ospf virtual-neigh 1 ospf Transit Area Router ID Neighbor address options virtual0.0.0.200 192.168.98.111 192.213.111.111 2 neighbor 2 Port Address state events count 4/3/1*8193.213.111.213 FULL 5 0 address 192.213.111.111, priority 1, id 192.168.98.111 designated_router 0.0.0.0, backup_designated_router 0.0.0.
show command output differences between 07.4.00 and 08.0.xx show Brocade#sh radius aaa-auth-queue radius aaa- AAA Queue Display Start...
show command output differences between 07.4.00 and 08.0.xx show webauth vlan 2 webpage Brocade#sh who Console connections: established, monitor enabled, privilege super-user, in config mode you are connecting to this session Telnet server status: Enabled Telnet connections (inbound): 1 established, client ip address 10.120.35.95, user is rose, privilege super-user using vrf default-vrf. The ouput is more detailed.
show command output differences between 07.4.00 and 08.0.xx show ip pim interface STR loopback 2 The output is modified and it ---------+---------------+----+---+-----------------------+---+--------now also shows +-------+------+---------+ VRF information. Interface|Local |Ver |St | Designated Router |TTL|Multicast| VRF | DR | Override |Address | | |Address Port|Thr|Boundary | | Prio | Interval ---------+---------------+----+---+-----------------------+---+--------+-------+------+---------+ l6 100.0.0.
show command output differences between 07.4.00 and 08.0.xx show authmacaddresses authorizedmac ipaddr Brocade#sh auth-mac-addresses authorized-mac ip-add -----------------------------------------------------------------------------MAC Address SourceIp Port Vlan Auth Age dot1x ACL -----------------------------------------------------------------------------54d1.1896.0000 102.1.1.1 2/1/8 1006 Yes Ena Ena 103 The output is displayed differently. ACL field is shown before dot1x in FastIron 07.4.00b.
show command output differences between 07.4.00 and 08.0.xx show tech- Brocade#sh tech-support memory support memory MEMORY Related Information : Stack unit 1: Total DRAM: 536870912 bytes Dynamic memory: 427036672 bytes total, 291012608 bytes free, 31% used Stack unit 2: Total DRAM: 536870912 bytes Dynamic memory: 427053056 bytes total, 293904384 bytes free, 31% used FLASH Related Information : Stack unit 1: Compressed Pri Code size = 8780516, Version:008.0.00a.00áT7f3 (FCXR08000b1.
show command output differences between 07.4.00 and 08.0.xx show authmacaddresses detailed ethernet ? Brocade#sh auth-mac-addresses detailed e 2/1/8 Port : 2/1/8 Dynamic-Vlan Assignment : Enabled RADIUS failure action : Block Traffic Failure restrict use dot1x : No Override-restrict-vlan : Yes Port Default VLAN : 1006 ( RADIUS assigned: Yes) (1006) Port Vlan State : RADIUS VLAN 802.
show command output differences between 07.4.00 and 08.0.xx show ipv6 Brocade#show ipv6 int ve 400 debug VLAN ID greater interface Interface ve 400 , Port 2065, addr c:0x263019d6, p:0x2a588300, than 255 can now ve 2 debug n:0x263886c6 be used. Conf: #Addr 1, enabled_conf 1, curr: enabled 1 port_enabled 1, port_is_up 0, mtu 1500, metric 1, redir 0 Address: 2000:400:400:400::3/64 LL address fe80:400::400:1 RUN: Port 2065, EUI 205:ff:fe05:5/64, MAC 0005.0005.
show command output differences between 07.4.00 and 08.0.xx show ip ospf area 1.2.3.4 database link-state ? show ip ospf ? Brocade#sh ip ospf area 0.0.0.200 database link-state Link States Index Area ID Cksum SyncState 1 0.0.0.200 0x2cb1 Done 2 0.0.0.200 0x723b Done 3 0.0.0.200 0x9940 Done 4 0.0.0.200 0x332b Done 5 0.0.0.200 0x08ce Done 6 0.0.0.200 0x6d5e Done 7 0.0.0.200 0x6122 Done 8 0.0.0.200 0x609d Done Type LS ID Adv Rtr Seq(Hex) Age Rtr 192.168.98.111 192.168.98.111 800001c3 498 Rtr 192.
show command output differences between 07.4.00 and 08.0.xx The output format is different. And, new "sync state" field is added. show ip ospf area 1.2.3.4 database link-state advertise 2 Brocade#sh ip ospf area 0.0.0.200 database link-state advertise 1 Index Area ID Type LS ID Adv Rtr Seq(Hex) Age Cksum SyncState 1 0.0.0.200 Rtr 192.168.98.111 192.168.98.111 8000010a 477 0xbe56 Done LSA Header: options: 0x02, seq-nbr: 0x8000010a, length: 72, flags:0x0500 link id = 193.213.111.213, link data = 193.213.
show command output differences between 07.4.00 and 08.0.xx show ip ospf area 1.2.3.4 database link-state extensive Brocade#sh ip ospf area 0.0.0.200 database link-state extensive Area ID Type LS ID Adv Rtr Seq(Hex) Age Cksum SyncState 0.0.0.200 Rtr 192.168.98.111 192.168.98.111 800001cc 874 0xb3ba Done LSA Header: options: 0x02, seq-nbr: 0x800001cc, length: 72, flags:0x0500 link id = 193.213.111.213, link data = 193.213.111.111, type = transit(2) tos count = 0, tos0_metric = 1 link id = 192.113.111.
show command output differences between 07.4.00 and 08.0.xx show ip ospf area 1.2.3.4 database link-state link-stateid 1.2.3.4 Brocade#sh ip ospf area 0.0.0.200 database link-state link-state-id 192.168.98.111 Ospf link-state by link-state ID 192.168.98.111 are in the following: Area ID Aging LS ID SyncState Type 0.0.0.200 991 192.168.98.111 Done RTR LSA Header: options: 0x02, seq-nbr: flags:0x0500 link id = 193.213.111.213, link data transit(2) tos count = 0, tos0_metric = 1 link id = 192.113.111.
show command output differences between 07.4.00 and 08.0.xx show ip ospf area 1.2.3.4 database link-state network Brocade#sh ip ospf area 0.0.0.200 database link-state network Area ID Type LS ID Adv Rtr Seq(Hex) Age SyncState 0.0.0.200 Net 192.113.112.113 192.168.98.113 800000be 409 0xffd2 Done LSA Header: options: 0x02, seq-nbr: 0x800000be, length: 32 NetworkMask: 255.255.255.254 attached router: 192.168.98.113 attached router: 192.168.98.112 The output format Cksum is different.
show command output differences between 07.4.00 and 08.0.xx show ip ospf area 1.2.3.4 database link-state router-id 1.2.3.4 Brocade#sh ip ospf area 0.0.0.200 database link-state router-id 192.168.98.111 Ospf link-state by router ID 192.168.98.111 are in the following: Area ID Aging LS ID SyncState Type 0.0.0.200 1928 192.168.98.111 Done RTR LSA Header: options: 0x02, seq-nbr: flags:0x0500 link id = 193.213.111.213, link data transit(2) tos count = 0, tos0_metric = 1 link id = 192.113.111.
show command output differences between 07.4.00 and 08.0.xx show ip ospf area 1.2.3.4 database link-state summary Brocade#sh ip ospf area 0.0.0.200 database link-state summary The output format Area ID Type LS ID Adv Rtr Seq(Hex) Age Cksum is different. And, SyncState new "sync state" 0.0.0.200 Summ 192.213.1.166 192.168.98.112 80000003 1670 field is added. 0xcc11 Done LSA Header: options: 0x02, seq-nbr: 0x80000003, length: 28 NetworkMask: 255.255.255.
show command output differences between 07.4.00 and 08.0.xx Found entry is added in front of network. show ip Brocade#show ip bgp debug network 1.1.1.32/32 bgp debug BGP: network 1.1.1.32/32 found network (x26ce0498, 0, 26ce0405) 1.1.1.32/32 1.2.3.0 weight:32768 back_door:0 imported:1 255.255.25 route-map:<> sptr:x0 5.0 next_hop:0.0.0.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.xx show tech- Too big to paste support l3 ipv4-uc IP Routing Table, IP Ospf Trap, IP Ospf Error, IP Ospf Resource, IP Ospf Neighbor Detail, IP Ospf Virtual-link, IP Ospf Virtualneighbor, IP RIP Routes, and IP RIP Interfaces information removed.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.xx show ip Graceful Restart Notify Time: 0 ospf redistribu te route ? "metric" keyword is added. show ip Redistribution: Disabled ospf redistribu te route 1.2.3.4 1.2.3.4 "metric" keyword is added. show ip pim nbr Header format is modified. Header format is modified.
show command output differences between 07.4.00 and 08.0.xx show ip rip interface ve 2 Interface State Change Trap: Enabled The output format is different. Metricoffset, Prefix List, Route-map information, RIP sent/receive statistics, and Error information are added. show ip ? Virtual Interface State Change Trap: Enabled "mroute" is removed. And, dnsserver, msdp, rtm, ssl, and vrf are added. show ipsec Interface Authentication Failure Trap: Enabled policy The output format is different.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.xx show processes cpu 2 Brocade#show process cpu 2 Statistics for last 1 sec and 988 ms Process Name Sec(%) Time(ms) ARP 0.08 1 BGP 0.00 0 DOT1X 0.00 0 GVRP 0.00 0 ICMP 0.00 0 IP 0.00 0 OSPF 0.00 0 RIP 0.00 0 STP 0.00 0 VRRP 0.70 14 Statistics for last 1 sec and 988 ms Process Name Sec(%) Time(ms) IPv6 0.00 0 ICMP6 0.01 0 ND6 0.02 0 RIPng 0.00 0 OSPFv3 0.00 0 IPV6_RX 0.00 0 NULL 0.00 0 Brocade# NULL entry is added.
show command output differences between 07.4.00 and 08.0.xx show ip ospf neighbor router-id 1.2.3.4 Brocade#sh ip ospf neighbor router-id 192.168.98.111 Port Address Pri State Ev Opt Cnt 4/3/1*8/3/1 193.213.111.213 1 FULL/BDR 192.168.98.111 6 2 0 v17 192.213.111.213 1 FULL/BDR 192.168.98.111 6 2 0 Neigh Address Neigh ID Options and CNT fields are added. 193.213.111.111 192.213.111.
show command output differences between 07.4.00 and 08.0.xx show ip Brocade#show ip route ospf route ospf Type Codes - B:BGP D:Connected O:OSPF R:RIP S:Static; Cost - Dist/Metric BGP Codes - i:iBGP e:eBGP OSPF Codes - i:Inter Area 1:External Type 1 2:External Type 2 Destination Gateway Port Cost Type Uptime 1 1.0.0.2/32 1.1.1.2 ve 100 110/501 O 1h3m 2 1.102.1.0/24 1.1.1.2 ve 100 110/2 O 35m5s OSPF and BGP subcodes, and Uptime information are added.
show command output differences between 07.4.00 and 08.0.xx show ip rip route Brocade#show ip rip route RIP Routing Table - 8 entries: 1.1.1.1/32, from 0.0.0.0, null (0) CONNECTED, metric 1, tag 0, timers: none 1.1.1.2/32, from 192.168.1.2, e 1/1/1 (5923) RIP, metric 2, tag 0, timers: aging 15 1.1.1.3/32, from 192.168.1.2, e 1/1/1 (7043) RIP, metric 4, tag 0, timers: aging 15 1.1.1.4/32, from 192.168.1.2, e 1/1/1 (5513) RIP, metric 3, tag 0, timers: aging 15 1.1.1.5/32, from 192.168.1.
show command output differences between 07.4.00 and 08.0.xx show ip traffic Brocade#show ip traffic IP Statistics 5145 received, 5751 sent, 0 forwarded 0 filtered, 0 fragmented, 0 reassembled, 0 bad header 0 no route, 0 unknown proto, 0 no buffer, 0 other errors RIP Statistics removed.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.
show command output differences between 07.4.00 and 08.0.xx show ip route ? Brocade#show ip route rip Row number and Type Codes - B:BGP D:Connected O:OSPF R:RIP S:Static; Cost - Dist/Metric uptime for a route, BGP Codes - i:iBGP e:eBGP are added. OSPF Codes - i:Inter Area 1:External Type 1 2:External Type 2 Destination Gateway Port Cost Type Uptime 1 1.1.1.2/32 192.168.1.2 e 1/1/1 120/2 R 1d3h 2 1.1.1.3/32 192.168.1.2 e 1/1/1 120/4 R 1d0h 3 1.1.1.4/32 192.168.1.2 e 1/1/1 120/3 R 1d3h 4 1.1.1.6/32 192.168.
show command output differences between 07.4.00 and 08.0.xx Some extra information is added in "sh techsupport stack" output. show tech- Brocade#sh tech-support stack support stack Stacking Status. alone: standalone, D: dynamic config, S: static config ID Type Role Mac Address Pri State Comment 1 S ICX6610-24F standby 748e.f834.8198 0 remote Ready 2 S ICX6610-24 active 748e.f893.
show command output differences between 07.4.00 and 08.0.xx show ip bgp filteredroutes detail prefixlist STR Brocade#sh ip bgp filtered-routes detail prefix-list STR Searching for matching routes, use ^C to quit... Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLEDMULTIPATH S:SUPPRESSED F:FILTERED s:STALE 1 Prefix: 42.42.42.42/32, Status: EF, Age: 0h29m37s NEXT_HOP: 103.1.1.1, Not Reachable, Learned from Peer: 103.1.1.
show command output differences between 07.4.00 and 08.0.xx show ip bgp routes Brocade#sh ip bgp routes best best Searching for matching routes, use ^C to quit... Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLEDMULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 1 36.5.5.5/32 36.0.0.1 100 0 BE AS_PATH: 3 2 36.5.5.6/32 36.0.0.1 100 0 BE AS_PATH: 3 3 36.5.5.7/32 36.0.0.1 100 0 BE AS_PATH: 3 4 36.5.
show command output differences between 07.4.00 and 08.0.xx show ip bgp routes Brocade#sh ip bgp routes community internet community Searching for matching routes, use ^C to quit... internet Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLEDMULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 1 36.5.5.5/32 36.0.0.1 100 0 BE AS_PATH: 3 2 36.5.5.6/32 36.0.0.1 100 0 BE AS_PATH: 3 3 36.5.5.7/32 36.0.0.
show command output differences between 07.4.00 and 08.0.xx show ip Brocade#sh ip bgp routes community no-export bgp routes Searching for matching routes, use ^C to quit... community Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED no-export E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLEDMULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 1 18.18.18.0/24 106.1.1.
show command output differences between 07.4.00 and 08.0.xx show ip Brocade#show ip bgp routes best bgp routes Searching for matching routes, use ^C to quit... best Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLEDMULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 1 1.1.1.2/32 6.1.1.1 30 100 32768 BL AS_PATH: 2 1.1.1.32/32 0.0.0.0 0 100 32768 BL AS_PATH: 3 18.18.0.0/16 0.0.0.
show command output differences between 07.4.00 and 08.0.xx show ip Brocade#show ip bgp routes best bgp routes Searching for matching routes, use ^C to quit... best Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLEDMULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 1 1.1.1.2/32 6.1.1.1 30 100 32768 BL AS_PATH: 2 1.1.1.32/32 0.0.0.0 0 100 32768 BL AS_PATH: 3 18.18.0.0/16 0.0.0.
show command output differences between 07.4.00 and 08.0.xx show ip Brocade#show ip bgp routes community internet bgp routes Searching for matching routes, use ^C to quit... community Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED internet E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLEDMULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 1 1.1.1.2/32 125.1.1.2 30 150 0 BE AS_PATH: 3 2 1.1.1.2/32 100.1.1.2 30 100 0 AS_PATH: 3 3 1.1.1.2/32 101.
show command output differences between 07.4.00 and 08.0.xx Sync information is added. show ipv6 Brocade#sh ipv6 ospf database ospf database ? LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link Iap:IntraPrefix Grc:Grace Area ID Sync 0.0.0.200 Yes 0.0.0.200 Yes 0.0.0.200 Yes 0.0.0.200 Yes 0.0.0.200 Yes 0.0.0.200 Yes 0.0.0.200 Yes 0.0.0.200 Yes 0.0.0.200 Yes show ipv6 ospf database advrtr 1.2.3.
show command output differences between 07.4.00 and 08.0.xx show ipv6 ospf database asexternal Sync information is added. Brocade#sh ipv6 ospf database as-external LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link Iap:IntraPrefix Grc:Grace Area ID Type LSID Adv Rtr Sync N/A Extn 2 192.168.98.
show command output differences between 07.4.00 and 08.0.xx show ipv6 ospf database extensive Sync information is added. Brocade#sh ipv6 ospf database extensive LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link Iap:IntraPrefix Grc:Grace Area ID Type LSID Adv Rtr Sync 0.0.0.200 Link 897 192.168.98.
show command output differences between 07.4.00 and 08.0.xx show ipv6 ospf database interrouter Sync information is added. Brocade#sh ipv6 ospf database inter-router LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link Iap:IntraPrefix Grc:Grace Area ID Type LSID Adv Rtr Sync 0.0.0.200 Inar 8 192.168.98.111 Yes Options: V6E---R-Metric: 1 Destination Router ID: 192.168.98.
show command output differences between 07.4.00 and 08.0.xx show ipv6 ospf database intraprefix Brocade#sh ipv6 ospf database intra-prefix LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link Iap:IntraPrefix Grc:Grace Area ID Type LSID Adv Rtr Seq(Hex) Age Cksum Len Sync 0.0.0.200 Iap 3 192.168.98.213 80000009 1054 6a0e 1272 Yes Number of Prefix: 62 Referenced LS Type: Router Referenced LS ID: 0 Referenced Advertising Router: 192.168.
show command output differences between 07.4.00 and 08.0.xx show ipv6 ospf database link Sync information is added. Brocade#sh ipv6 ospf database link LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link Iap:IntraPrefix Grc:Grace Area ID Type LSID Adv Rtr Sync 0.0.0.200 Link 897 192.168.98.
show command output differences between 07.4.00 and 08.0.xx show ipv6 ospf database link-id 2 Sync information is added. Brocade#sh ipv6 ospf database link-id 1156 LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link Iap:IntraPrefix Grc:Grace Area ID Type LSID Adv Rtr Seq(Hex) Age Sync 0.0.0.200 Link 1156 192.168.98.
show command output differences between 07.4.00 and 08.0.xx show ipv6 ospf database network Sync information is added. Brocade#sh ipv6 ospf database network LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link Iap:IntraPrefix Grc:Grace Area ID Type LSID Adv Rtr Sync 0.0.0.200 Net 1156 192.168.98.111 Yes Options: V6E---R-Attached Router: 192.168.98.111 Attached Router: 192.168.98.
show command output differences between 07.4.00 and 08.0.xx show ipv6 ospf database prefix 2000:5678: 90ab:cdef: 0123:4567: 890a:bcde/ 64 Sync information is added. Brocade#sh ipv6 ospf database prefix 5100::192:168:98:190/128 LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link Iap:IntraPrefix Grc:Grace Area ID Type LSID Adv Rtr Sync 0.0.0.200 Inap 839 192.168.98.
show command output differences between 07.4.00 and 08.0.xx show ipv6 ospf database router Brocade#sh ipv6 ospf database router LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link Iap:IntraPrefix Grc:Grace Sync information is added. Area ID Type LSID Adv Rtr Seq(Hex) Age Cksum Len Sync 0.0.0.200 Rtr 0 192.168.98.
show command output differences between 07.4.00 and 08.0.xx show ipv6 Brocade#sh ipv6 ospf database scope area ospf database LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter scope area Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link ? Iap:IntraPrefix Grc:Grace Area ID Type LSID Adv Rtr Seq(Hex) Age Cksum Len Sync 0.0.0.200 Rtr 0 192.168.98.
show command output differences between 07.4.00 and 08.0.xx show ipv6 Brocade#sh ipv6 ospf database scope area 0.0.0.200 ospf database LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter scope area Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link 0.0.0.200 Iap:IntraPrefix Grc:Grace Sync information is added. Area ID Type LSID Adv Rtr Seq(Hex) Age Cksum Len Sync 0.0.0.200 Rtr 0 192.168.98.
show command output differences between 07.4.00 and 08.0.xx show ipv6 ospf database scope as Sync information is added. Brocade#sh ipv6 ospf database scope as LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link Iap:IntraPrefix Grc:Grace Area ID Type LSID Adv Rtr Sync N/A Extn 2 192.168.98.
show command output differences between 07.4.00 and 08.0.xx Sync information is added. show ipv6 Brocade#sh ipv6 ospf database scope link ospf database LSA Key - Rtr:Router Net:Network Inap:InterPrefix Inar:InterRouter scope link Extn:ASExternal Grp:GroupMembership Typ7:Type7 Link:Link Iap:IntraPrefix Grc:Grace Area ID Type LSID Adv Rtr Seq(Hex) Age Cksum Len Sync 0.0.0.200 Link 136 192.168.98.
show command output differences between 07.4.00 and 08.0.xx show tech- Brocade#sh tech-support cpu support cpu CPU Usage Information Current total CPU utilization = 73% ... Usage average for all tasks in the last 1 second ... ========================================================== Name % show ip cache 1.2.3.
show command output differences between 07.4.00 and 08.0.xx show ip pim rpf 1.2.3.4 ? Brocade#show ip pim rpf A.B.C.D Source address for RPF check The explanation for A.B.C.D is updated. show ip pim rpf 1.2.3.4 1.2.3.4 Brocade#show ip pim rpf 90.1.1.32 226.0.0.201 upstream nbr 110.1.1.25 on v110 The explanation details are updated.
show command output differences between 07.4.00 and 08.0.xx show ip Brocade#show ip interface loopback 1 interface Interface Loopback 1 loopback 2 port enabled port state: UP ip address: 1.0.0.1 subnet mask: 255.255.255.255 Port belongs to VRF: default-vrf encapsulation: ETHERNET, mtu: 1500, metric: 1 directed-broadcast-forwarding: disabled proxy-arp: disabled ip arp-age: 10 minutes No Helper Addresses are configured.
show command output differences between 07.4.00 and 08.0.xx show ip ospf routes ? Brocade#sh ip ospf summ Total number of OSPF instances: 1 Seq Instance Intfs 1 default-vrf 259 Brocade#sh ip ospf route OSPF Area 0 ASBR Routes 1: Nbrs 4 Nbrs-Full LSAs 4 1742 Routes 310 Destination 192.168.98.190 Adv_Router Mask Path_Cost Type2_Cost Path_Type 255.255.255.255 2 0 Intra Link_State Dest_Type State Tag 192.168.98.190 192.168.98.190 VRF instance information is added.
show command output differences between 07.4.00 and 08.0.xx show ip cache ? Brocade#show ip cache DECIMAL Cached entry index A.B.C.D Cached IP address vrf VPN Routing/Forwarding instance | Output modifiers FastIron Ethernet Switch Software Upgrade Guide 53-1003089-01 VRF option is added.
