Configuration Guide User guide

FastIron Configuration Guide 1025
53-1002494-02
Configuring IP parameters – Layer 3 Switches
Displaying address-pool information
This show ip dhcp-server address-pool command displays information about a specific address
pool, or for all address pools.
Brocade# show ip dhcp-server address-pools
Output similar to the following is displayed, as shown here.
Showing all address pool(s):
Pool Name: one
Time elapsed since last save: 0d:0h:6m:52s
Total number of active leases: 2
Address Pool State: active
IP Address Exclusions: 192.168.1.45
IP Address Exclusions: 192.168.1.99 192.168.1.103
Pool Configured Options:
bootfile: example.bin
dhcp-default-router: 192.168.1.1
dns-server: 192.168.1.100
domain-name: example.com
lease: 0 0 30
netbios-name-server: 192.168.1.101
network: 192.168.1.0 255.255.255.0
next-bootstrap-server: 192.168.1.102
tftp-server: 192.168.1.103
Syntax: show ip dhcp-server address-pool[s] [<name>]
• address-pool[s] - If you enter address-pools, the display will show all address pools
• <name> - Displays information about a specific address pool
The following table describes this output.
TABLE 174 CLI display of show ip dhcp-server binding command
Field Description
IP address The IP addresses currently in the binding database
Client ID/Hardware address The hardware address for the client
Lease expiration The time when this lease will expire
Type The type of lease