Configuration Guide User guide

1192 FastIron Configuration Guide
53-1002494-02
Modifying and displaying Layer 3 system parameter limits
The following example shows output on a FastIron X Series with second generation modules.
The following example shows output on a FastIron X Series with third generation modules.
Brocade#show default value
sys log buffers:50 mac age time:300 sec telnet sessions:5
ip arp age:10 min bootp relay max hops:4 ip ttl:64 hops
ip addr per intf:24
igmp group memb.:140 sec igmp query:60 sec
ospf dead:40 sec ospf hello:10 sec ospf retrans:5 sec
ospf transit delay:1 sec
System Parameters Default Maximum Current
ip-arp 4000 64000 4000
ip-static-arp 512 1024 512
some lines omitted for brevity....
hw-ip-next-hop 6144 6144 6144
hw-ip-mcast-mll 1024 4096 1024
hw-traffic-condition 50 1024 50
Brocade#show default value
sys log buffers:50 mac age time:300 sec telnet sessions:5
ip arp age:10 min bootp relay max hops:4 ip ttl:64 hops
ip addr per intf:24
igmp group memb.:140 sec igmp query:60 sec
ospf dead:40 sec ospf hello:10 sec ospf retrans:5 sec
ospf transit delay:1 sec
System Parameters Default Maximum Current
ip-arp 4000 64000 4000
ip-static-arp 512 1024 512
some lines omitted for brevity....
hw-ip-next-hop 6144 6144 6144
hw-ip-mcast-mll 1024 4096 1024
hw-traffic-condition 50 1024 50