Configuration Guide User guide

1198 FastIron Configuration Guide
53-1002494-02
Enabling or disabling Layer 2 switching
Brocade(config)#no route-only
Brocade(config)#exit
Brocade#write memory
Brocade#reload
Syntax: [no] route-only
To disable Layer 2 switching only on a specific interface, go to the interface configuration level for
that interface, and then disable the feature. The following commands show how to disable Layer 2
switching on port 2.
Brocade(config)#interface ethernet 2
Brocade(config-if-e1000-2)#route-only