Configuration Guide User guide

FastIron Configuration Guide 1223
53-1002494-02
Displaying RIPng routing table
Displaying RIPng routing table
To display the RIPng routing table, enter the show ipv6 rip route command at any CLI level.
Syntax: show ipv6 rip route [<ipv6-prefix>/<prefix-length> | <ipv6-address>]
The <ipv6-prefix>/<prefix-length> parameters restrict the display to the entries for the specified
IPv6 prefix. You must specify the <ipv6-prefix> parameter in hexadecimal using 16-bit values
between colons as documented in RFC 2373. You must specify the <prefix-length> parameter as a
decimal value. A slash mark (/) must follow the <ipv6-prefix> parameter and precede the
<prefix-length> parameter.
The <ipv6-address> parameter restricts the display to the entries for the specified IPv6 address.
You must specify this parameter in hexadecimal using 16-bit values between colons as
documented in RFC 2373.
Table 211 describes the information displayed by the show ipv6 rip route command.
TABLE 211 RIPng routing table fields
Field Description
IPv6 RIPng Routing Table
entries
The total number of entries in the RIPng routing table.
<ipv6-prefix>/<prefix-length>
OR <ipv6-address>
The IPv6 prefix and prefix length.
The IPv6 address.
Next-hop router The next-hop router for this Brocade device. If :: appears, the route is originated
locally.
Interface The interface name. If “null” appears, the interface is originated locally.
Serial number The number identifying the order in which the route was added to the RIPng
route table.
Source of route The source of the route information. The source can be one of the following:
• LOCAL – Routes configured on local interfaces taking part in RIPng.
• RIP – Routes learned by RIPng.
• CONNECTED – IPv6 routes redistributed from directly connected networks.
• STATIC – IPv6 static routes are redistributed into RIPng.
• OSPF – OSPF V3 routes are redistributed into RIPng.
Metric <number> The cost of the route. The <number> parameter indicates the number of hops to
the destination.
Tag <number> The tag value of the route.
Timers: Indicates if the hold-down timer or the garbage-collection timer is set.
Brocade# show ipv6 rip route
IPv6 RIP Routing Table - 4 entries:
2001::/64, from fe80::212:f2ff:fe87:9a40, ve 177 (314)
RIP, metric 2, tag 0, timers: aging 11
2001:11:11::/64, from ::, null (0)
CONNECTED, metric 1, tag 0, timers: none
2001:aa:2001:102:1:1::/96, from ::, ve 102 (1)
LOCAL, metric 1, tag 0, timers: none
2001:aa:2061:31:1:1::/96, from fe80::2e0:52ff:fe88:8000, ve 100 (58)
RIP, metric 2, tag 0, timers: aging 43