Configuration Guide User guide

FastIron Configuration Guide 1521
53-1002494-02
Global IP multicast parameters
Syntax: [no] ip igmp static-group <ip-addr> [ [ count <number>] | drop | [ethernet <portnum>] ]
The <ip-addr> parameter specifies the group number.
The count <number> parameter specifies the number of contiguous groups per vlan. The
<number> variable must be from 1 through 512.
The drop parameter specifies the number of dropped multicast packets. The drop option is
available only for static groups on a vlan.
NOTE
On FSX devices, the drop option is not available for a multicast group.
The ethernet <portnum> parameter specifies the port number. Use this parameter if the port is a
member of a virtual routing interface, and you are entering this command at the configuration level
for the virtual routing interface.