Configuration Guide User guide

FastIron Configuration Guide 1551
53-1002494-02
PIM Sparse
Displaying RP-to-group mappings
To display RP-to-group-mappings, enter the show ip pim rp-map command at any CLI level.
Brocade#show ip pim rp-map
Number of group-to-RP mappings: 1
Group address RP address age
----------------------------------------
1 239.200.1.1 192.168.98.212 0
Syntax: show ip pim rp-map
Table 260 shows the information displayed by the show ip pim rp-map command.
Displaying RP information for a PIM Sparse group
To display RP information for a PIM Sparse group, enter the show ip pim rp-hash command at any
CLI level.
Syntax: show ip pim rp-hash <group-addr>
The <group-addr> parameter is the address of a PIM Sparse IP multicast group.
TABLE 259 Output of show ip pim rp-candidate
Field Description
Candidate-RP-advertisement
in
Indicates how many seconds will pass before the BSR sends its next RP
message.
NOTE: This field appears only if this Layer 3 switch is a candidate RP.
RP Indicates the IP address of the Rendezvous Point (RP).
NOTE: This field appears only if this Layer 3 switch is a candidate RP.
group prefixes Indicates the multicast groups for which the RP listed by the previous field is a
candidate RP.
NOTE: This field appears only if this Layer 3 switch is a candidate RP.
Candidate-RP-advertisement
period
Indicates how frequently the BSR sends candidate RP advertisement messages.
NOTE: This field appears only if this Layer 3 switch is a candidate RP.
TABLE 260 Output of show ip pim rp-map
Field Description
Group address Indicates the PIM Sparse multicast group address using the listed RP.
RP address Indicates the IP address of the Rendezvous Point (RP) for the listed PIM Sparse group.
Brocade#show ip pim rp-hash 225.0.0.15
RP: 192.168.1.160, version 2
Info source: 192.168.1.160, via bootstrap