Configuration Guide User guide

1576 FastIron Configuration Guide
53-1002494-02
Multicast Source Discovery Protocol (MSDP)
Notifications Received The number of Notification messages the MSDP router has received from the
peer.
Source-Active Sent The number of Source Active messages the MSDP router has sent to the peer.
Source-Active Received The number of Source Active messages the MSDP router has received from the
peer.
Last Connection Reset Reason The reason the previous session with this neighbor ended.
Notification Message Error Code
Received
If the MSDP router receives a NOTIFICATION messages from the neighbor, the
message contains an error code corresponding to one of the following errors.
Some errors have subcodes that clarify the reason for the error. Where
applicable, the subcode messages are listed underneath the error code
messages:
• 1 – Message Header Error
• 2 – SA-Request Error
• 3 – SA-Message/SA-Response Error
• 4 – Hold Timer Expired
• 5 – Finite State Machine Error
• 6 – Notification
• 7 – Cease
For information about these error codes, see section 17 in the Internet draft
describing MSDP, “draft-ietf-msdp-spec”.
Notification Message Error
SubCode Received
See above.
Notification Message Error Code
Transmitted
The error message corresponding to the error code in the NOTIFICATION
message this MSDP router sent to the neighbor. See the description for the
Notification Message Error Code Received field for a list of possible codes.
Notification Message Error
SubCode Transmitted
See above.
TCP Statistics
TABLE 267 MSDP peer information (Continued)
Field Description