Configuration Guide User guide

FastIron Configuration Guide 1687
53-1002494-02
Displaying VRRP and VRRP-E information
The following example is for a VRRP Backup.
The following example is for a VRRP-E Master.
Syntax: show ip vrrp brief | ethernet [<slotnum>/]<portnum> | ve <num> | stat
Syntax: show ip vrrp-extended brief | ethernet [<slotnum>/]<portnum> | ve <num> | stat
The brief option displays summary information. Refer to “Displaying summary information” on
page 1684.
The ethernet <portnum> option specifies an Ethernet port. If you use this option, the command
displays VRRP or VRRP-E information only for the specified port. Also, you must specify the
<slotnum> variable on chassis devices.
Brocade#show ip vrrp
Total number of VRRP routers defined: 1
Interface ethernet v3
auth-type simple text password
VRID 3
state backup
administrative-status enabled
mode non-owner(backup)
priority 110
current priority 110
hello-interval 1000 msec
dead-interval 0 msec
current dead-interval 3500 msec
preempt-mode true
ip-address 172.21.3.1
virtual mac address 0000.5e00.0103
advertise backup: enabled
next hello sent in 00:00:26.1
master router 172.21.3.1 expires in 00:00:02.7
track-port 4/1-4/4(up)
Brocade#show ip vrrp-extended
Total number of VRRP-Extended routers defined: 50
Interface ethernet v201
auth-type simple text password
VRID 201
state master
administrative-status enabled
priority 220
current priority 220
hello-interval 1000 msec
dead-interval 0 msec
current dead-interval 3100 msec
preempt-mode true
virtual ip address 201.201.201.5
virtual mac address 02e0.52d7.82c9
advertise backup: enabled
next hello sent in 00:00:00.1
backup router 201.201.201.4 expires in 00:02:45.2
backup router 201.201.201.3 expires in 00:02:47.6
track-port 1/1/25*2/1/24(up)