Configuration Guide User guide

FastIron Configuration Guide 1827
53-1002494-02
Displaying 802.1X information
Displaying dynamically applied MAC address
filters and IP ACLs
To display the dynamically applied MAC address filters active on an interface, enter a command
such as the following.
Syntax: show dot1x mac-address-filter all | ethernet <port>
The all keyword displays all dynamically applied MAC address filters active on the device.
Specify the port variable in one of the following formats:
• FWS, FCX, and ICX stackable switches – stack-unit/slotnum/portnum
• FSX 800 and FSX 1600 chassis devices – slotnum/portnum
• ICX devices – slotnum/portnum
• FESX compact switches – portnum
To display the dynamically applied IP ACLs active on an interface, enter a command such as the
following.
Syntax: show dot1x ip-ACL all | ethernet <port>
The all keyword displays all dynamically applied IP ACLs active on the device.
Specify the port variable in one of the following formats:
• FWS, FCX, and ICX stackable switches – stack-unit/slotnum/portnum
• FSX 800 and FSX 1600 chassis devices – slotnum/portnum
• ICX devices – slotnum/portnum
• FESX compact switches – portnum
Brocade#show dot1x mac-address-filter e 1/3
Port 1/3 MAC Address Filter information:
802.1X Dynamic MAC Address Filter :
mac filter-group 2
Port default MAC Address Filter:
No mac address filter is set
Brocade#show dot1x ip-ACL e 1/3
Port 1/3 IP ACL information:
802.1X dynamic IP ACL (user defined) in:
ip access-list extended Port_1/3_E_IN in
Port default IP ACL in:
No inbound ip access-list is set
802.1X dynamic IP ACL (user defined) out:
ip access-list extended Port_1/3_E_OUT out
Port default IP ACL out:
No outbound ip access-list is set