Configuration Guide User guide

FastIron Configuration Guide 1875
53-1002494-02
Displaying multi-device port authentication information
Displaying multi-device port authentication settings
and authenticated MAC addresses
To display the multi-device port authentication settings and authenticated MAC addresses for a
port where the feature is enabled, enter the following command.
Syntax: show auth-mac-address [detail] [ethernet <port>]
Specify the port variable in one of the following formats:
• FWS, FCX, and ICX stackable switches – stack-unit/slotnum/portnum
• FSX 800 and FSX 1600 chassis devices – slotnum/portnum
• ICX devices – slotnum/portnum
• FESX compact switches – portnum
Omitting the ethernet <port> parameter displays information for all interfaces where the
multi-device port authentication feature is enabled.
Time The time the MAC address was authenticated. If the clock is set on the Brocade device, then
the actual date and time are displayed. If the clock has not been set, the time is displayed
relative to when the device was last restarted.
Age The age of the MAC address entry in the authenticated MAC address list.
Dot1x Indicates if 802.1X authentication is enabled or disabled for the MAC address
TABLE 313 Output of show auth-mac-address (Continued)
Field Description