Configuration Guide User guide

1878 FastIron Configuration Guide
53-1002494-02
Displaying multi-device port authentication information
Displaying the MAC authentication table for FCX devices
For FCX devices, there are three commands you can use to display MAC authentication information:
• show table <mac address>
• show table allowed-mac
• show table denied-mac
This section describes the output for these commands.
To display MAC authentication information for FCX devices, enter the show table <mac address>
command as shown.
Brocade#show table 0000.0010.1002
Syntax: show table <mac address>
The <mac address> variable is the specified MAC address.
Brocade#show table 0000.0010.1002
-------------------------------------------------------------------------------
MAC Address Port Vlan Authenticated Time Age dot1x
-------------------------------------------------------------------------------
0000.0010.1002 2/1/48 2 Yes 00d00h30m57s Ena Dis
Brocade#
To display the table of allowed (authenticated) mac addresses enter the show table allowed-mac
command as shown.
Syntax: show table allowed-mac
Brocade#show table allowed-mac
-------------------------------------------------------------------------------
MAC Address PortVlanAuthenticatedTimeAgedot1x
-------------------------------------------------------------------------------
0000.0010.100a 1/1/1 2 Yes 00d00h30m57s Ena Dis
0000.0010.100b 1/1/1 2 Yes 00d00h31m00s Ena Dis
0000.0010.1002 2/1/48 2 Yes 00d00h30m57s Ena Dis
0000.0010.1003 2/1/48 2 Yes 00d00h30m57s Ena Dis
0000.0010.1004 2/1/48 2 Yes 00d00h30m57s Ena Dis
Brocade#
Authenticated Whether the MAC address has been authenticated by the RADIUS server.
Time The time at which the MAC address was authenticated. If the clock is set on the
Brocade device, then the actual date and time are displayed. If the clock has
not been set, then the time is displayed relative to when the device was last
restarted.
Age The age of the MAC address entry in the authenticated MAC address list.
Dot1x Indicated if 802.1X authentication is enabled or disabled for the MAC address
TABLE 314 Output from the show auth-mac-addresses detailed command (Continued)
Field Description