Configuration Guide User guide
1918 FastIron Configuration Guide
53-1002494-02
Displaying web authentication information
The displays shows the following information.
Syntax: show webauth allowed-list
Displaying a list of hosts attempting to authenticate
Enter the show webauth authenticating-list command to display a list of hosts that are trying to
authenticate.
The report shows the following information.
Syntax: show webauth authenticating-list
Field Description
VLAN #: Web Authentication The ID of the VLAN on which Web Authentication is
enabled.
Web Authenticated List MAC Address The MAC addresses that have been authenticated.
User Name The authenticated username.
Configuration Static/Dynamic If the MAC address was dynamically (passed Web
Authentication) or statically (added to the authenticated
list using the add mac command) authenticated.
Authenticated Duration The remainder of time the MAC address will remain
authenticated
This field... Displays...
VLAN #: Web Authentication The ID of the VLAN on which Web Authentication is
enabled.
MAC Address The MAC addresses that are trying to be authenticated.
User Name The User Name associated with the MAC address.
# of Failed Attempts Number of authentication attempts that have failed.
Cycle Time Remaining The remaining time the user has to be authenticated
before the current authentication cycle expires. Once it
expires, the user must enter a valid URL again to display
the Web Authentication Welcome page.
Brocade#show webauth authenticating-list
===============================================================================
VLAN 25: Web Authentication
-------------------------------------------------------------------------------
Web Authenticating List # of Failed Cycle Time
Remaining
MAC Address User Name Attempts HH:MM:SS
-------------------------------------------------------------------------------
0012.3ff9.1fc6 N/A 0 00:09:46