Configuration Guide User guide

FastIron Configuration Guide 1951
53-1002494-02
Rate limiting in hardware
Displaying the fixed rate limiting configuration
To display the fixed rate limiting configuration on the device, enter the show rate-limit input
command.
Syntax: show rate-limit input
The command lists the ports on which fixed rate limiting is configured, and provides the
information listed in Table 321 for each of the ports.
TABLE 321 CLI display of Fixed rate limiting information
Field Description
Total rate-limited interface count The total number of ports that are configured for Fixed rate limiting.
Port The port number.
Configured Input Rate The maximum rate requested for inbound traffic. The rate is measured
in kilobits per second (kbps).
Actual Input Rate The actual maximum rate provided by the hardware. The rate is
measured in bps.
Brocade# show rate-limit input
Total rate-limited interface count: 5.
Port Configured Input Rate Actual Input Rate
1/1 65000 65000
1/2 195000 195000
1/6 1950 1950
5/2 230432 230000
5/6 234113 234000