Configuration Guide User guide

FastIron Configuration Guide 1961
53-1002494-02
Displaying the fixed rate limiting configuration
The command lists the ports on which fixed rate limiting is configured, and provides the
information listed in Table 326 for each of the ports.
Displaying fixed rate limiting configuration
on outbound ports
To display the fixed rate limiting configuration on outbound ports, enter the show rate-limit fixed
output command.
Syntax: show rate-limit fixed output
The command lists the ports on which fixed rate limiting is configured, and provides the
information listed in Table 326 for each of the ports.
TABLE 326 CLI display of Fixed rate limiting information on inbound ports
Field Description
Total rate-limited interface count The total number of ports that are configured for Fixed rate limiting.
Port The port number.
Configured Input Rate The maximum rate requested for inbound traffic. The rate is measured
in bits per second (bps).
Actual Input Rate The actual maximum rate provided by the hardware. The rate is
measured in bps.
TABLE 327 CLI display of Fixed rate limiting information on outbound ports
Field Description
Port The port number.
PortMax The maximum rate requested for outbound traffic. The rate is measured
in bits per second (bps).
Prio0 – Prio7 The port- and priority-based rate limit maximum provided by the
hardware. The rate is measured in bps.
Brocade#show rate-limit fixed output
Outbound Rate Shaping Limits in Kbps:
Port PortMax Prio0 Prio1 Prio2 Prio3 Prio4 Prio5 Prio6 Prio7
1 1000000
3 10000000
7 10000000
9 7500000
11 8000000
12 8000000
13 8000000
14 8000000
15 8000000
21 8000000
25 7500000