Configuration Guide User guide

FastIron Configuration Guide 2005
53-1002494-02
Syslog messages
Informational Warm start The system software (flash code) has been
reloaded.
Informational Stack: Stack unit <unit#> has been deleted
to the stack system
The specified unit has been deleted from
the stacking system.
Informational Stack unit <unitNumber> has been elected
as ACTIVE unit of the stack system
The specified unit in a stack has been
elected as the Master unit for the stacking
system.
Informational Stack: Stack unit <unit#> has been added to
the stack system
The specified unit has been added to the
stacking system.
Informational System: Management MAC address changed
to <mac_address>
The management MAC address of a
stacking system has been changed
Informational System: Stack unit <unit#> Fan <fan#>
(<description>), failed
The operational status of a fan in the
specified unit in a stack changed from
normal to failure.
Informational System: Stack unit <unit#> Power supply
<power-supply#> is down
The operational status of a power supply of
the specified unit in a stack changed from
normal to failure.
Informational System: Stack unit <unit#> Power supply
<power-supply#> is up
The operational status of a power supply of
the specified unit in a stack changed from
failure to normal.
Informational System: Stack unit <unit#r> Fan <fan#>
(<description>), ok
The operational status of a fan in the
specified unit in a stack changed from
failure to normal.
Informational System: Stack unit <unitNumber>
Temperature <actual-temp> C degrees,
warning level <warning-temp> C degrees,
shutdown level <shutdown-temp> C degrees
The actual temperature reading for a unit in
a stack is above the warning temperature
threshold.
Informational vlan <vlan-id> Bridge is RootBridge
<mac-address> (MgmtPriChg)
802.1W changed the current bridge to be
the root bridge of the given topology due to
administrative change in bridge priority.
Informational vlan <vlan-id> Bridge is RootBridge
<mac-address> (MsgAgeExpiry)
The message age expired on the Root port
so 802.1W changed the current bridge to
be the root bridge of the topology.
Informational vlan <vlan-id> interface <portnum> Bridge
TC Event (DOT1wTransition)
802.1W recognized a topology change
event in the bridge. The topology change
event is the forwarding action that started
on a non-edge Designated port or Root port.
Informational vlan <vlan-id>
interface <portnum> STP
state -> <state> (DOT1wTransition)
802.1W changed the state of a port to a
new state: forwarding, learning, blocking. If
the port changes to blocking, the bridge
port is in discarding state.
Informational vlan <vlan-id> New RootBridge
<mac-address> RootPort <portnum>
(BpduRcvd)
802.1W selected a new root bridge as a
result of the BPDUs received on a bridge
port.
Informational vlan <vlan-id> New RootPort <portnum>
(RootSelection)
802.1W changed the port role to Root port,
using the root selection computation.
TABLE 1 Brocade Syslog messages (Continued)
Message level Message Explanation