Configuration Guide User guide

FastIron Configuration Guide 5
53-1002494-02
1418
removing route dampening from a route
, 1418
removing route flap dampening
, 1459
requiring the first AS to be the neighbor AS
, 1376
resetting a neighbor session
, 1451
route flap dampening configuration
, 1414
route reflection parameter configuration
, 1378
route reflector configuration
, 1380
router ID comparison
, 1376
selecting a path for a route
, 1344
setting parameters in the routes
, 1408
setting the local AS number
, 1353
show commands for BGP null 0 routing
, 1389
shutting down a session with a BGP4 neighbor
, 1364
special characters for regular expressions
, 1397
specific IP address filtering
, 1394
specifying a list of networks to advertise
, 1368
specifying a route map name
, 1369
specifying the match conditions
, 1405
UPDATE messages from BGP4 routers
, 1346
updating route information
, 1451
updating using soft reconfiguration
, 1452
using a route map to configure route flap dampening
,
1416, 1417
using a table map to set the rag value
, 1411
using regular expressions to filter
, 1397
using the IP default route as a valid next hop
, 1370
Bridge Protocol Data Units (BPDUs)
displaying the guard status
, 1164
enabling protection by port
, 1163
overview
, 1163
re-enabling ports
, 1164
status example
, 1165
broadcast limiting command syntax
, 33, 34
broadcast, multicast, and unknown traffic
limiting
, 32
viewing
, 36
Brocade FCX
changing default stacking port configurations
, 261
configuring default ports
, 261
hitless supported services and protocols
, 330
IronStack configuration
, 258
using secure-setup to build an IronStack
, 263
Brocade FCX-S and FCXS-F devices, configuring stacking
ports
, 259
Brocade ICX
configuring an IronStack
, 265
configuring trunked stacking ports
, 265
Brocade IronStack
accessing
, 273
active controller
, 326
active controller and standby controller elections
, 327
active controller and standby controller resets
, 328
bootup role
, 327
configuration mismatch for stack units
, 320
configuration notes
, 249
configuring default stacking port to function as a data