Configuration Guide User guide

FastIron Configuration Guide 189
53-1002494-02
Displaying SSH information
Displaying SSH configuration information
To display SSH configuration information, use the show ip ssh config command:
Syntax: show ip ssh config
This display shows the following information.
Encryption The encryption method used for the connection.
Username The user name for the connection.
HMAC The HMAC version
Server Hostkey The type of server hostkey. This can be DSA or RSA.
IP Address The IP address of the SSH client
SSH-v2.0 enabled Indicates that SSHv2 is enabled.
hostkey Indicates that at least one host key is on the device. It is followed by a list
of the the host key types and modulus sizes.
Field Description
SSH server SSH server is enabled or disabled
SSH port SSH port number
Encryption The encryption used for the SSH connection. The following values are
displayed when AES only is enabled:
• AES-256, AES-192, and AES-128 indicate the different AES
methods used for encryption.
• 3-DES indicates 3-DES algorithm is used for encryption.
Permit empty password Empty password login is allowed or not allowed.
TABLE 29 SSH connection information (Continued)
Field Description
Brocade# show ip ssh config
SSH server :Enabled
SSH port :22
Encryption :AES-256 AES-192 AES-128 3-DES
Permit empty password :Yes
Authentication methods :Password Public-key Interactive
Authentication retries :10
Login timeout (seconds) :20
Idle timeout (minutes) :10
Strict management VRF :Enabled
SCP :Disabled
SSH IPv4 clients :200.200.200.201. 200.200.200.202. 200.200.200.203
SSH IPv6 clients :3ffe:1934:4545:3112:2040:f8ff:fe21:6001
SSH IPv4 access-list :4
SSH IPv6 access-list :ssh_ipv6_acl
Brocade#