Configuration Guide User guide

190 FastIron Configuration Guide
53-1002494-02
Displaying SSH information
Displaying additional SSH connection information
The show who command also displays information about SSH connections:
show who [begin <expression> | exclude <expression> | include <expression>]
Authentication methods The authentication methods used for SSH. The authentication can have
one or more of the following values:
Password - indicates that you are prompted for a password when
attempting to log into the device.
Public-key - indicates that DSA or RSA challenge-response
authentication is enabled.
Interactive - indicates the interactive authentication si enabled.
Authentication retries The number of authentication retries. This number can be from 1 to 5.
Login timeout (seconds) SSH login timeout value in seconds. This can be from 0 to 120.
Idle timeout (minutes) SSH idle timeout value in minutes. This can be from 0 to 240.
Strict management VRF Strict management VRF is enabled or disabled.
SCP SCP is enabled or disabled.
SSH IPv4 clients The list of IPv4 addresses to which SSH access is allowed. The default is
“All”.
SSH IPv6 clients The list of IPv4 addresses to which SSh access is allowed. Default “All”.
SSH IPv4 access-list The IPv4 ACL used to permit or deny access using SSH.
SSH IPv6 access-list The IPv6 ACL used to permit or deny access to device using SSH.
Field Description
Brocade#show who
Console connections:
Established
you are connecting to this session
2 minutes 56 seconds in idle
SSH server status: Enabled
SSH connections (inbound):
1. established, client ip address 2.2.2.1, server hostkey DSA
1 minutes 15 seconds in idle
2. established, client ip address 2.2.2.2, server hostkey RSA
2 minutes 25 seconds in idle
SSH connection (outbound):
3. established, server ip address 10.37.77.15, server hostkey RSA
7 seconds in idle