Configuration Guide User guide

FastIron Configuration Guide 203
53-1002494-02
Licensed features and part numbers
FCX
Advance Layer 3:
BGP4
GRE
N/A1
FCX-ADV-LIC-SW FCX624-E-ADV
FCX-624-I-ADV
FCX624S-ADV
FCX624S-HPOE-ADV
FCX624S-F-ADV
FCX648-E-ADV
FCX648-I-ADV
FCX648S-ADV
FCX648S-HPOE-ADV
ICX 6610
Software-based
licensing is only
supported on
ICX 6610
devices.
Premium Layer 3:
OSPF v2
OSPF v3
PIM-DM
PIM-SM
PIM-SSM
PIM passive
PBR
RIP v1, v2
RIPng
VRRP
VRRP v3 for IPv6
VRRP-E
VRRP-E for IPv6
IPv6 unicast routing
N/A
1
ICX 6610-PREM-LIC-SW
ICX 6610-24-PE
ICX 6610-24-PI
ICX 6610-24P-PE
ICX 6610-24P-PI
ICX 6610-24F-PE
ICX 6610-24F-PI
ICX 6610-48-PE
ICX 6610-48-PI
ICX 6610-48P-PE
ICX 6610-48P-PI
Advance Layer 3:
All features in the Premium license (see the
cell above - Premium Layer 3).
BGP4
N/A
1
ICX 6610-ADV-LIC-SW
Sold separately. To purchase
the ICX 6610 Advance
license, contact your
Brocade representative.
Upgrade from Premium to Advance license
This license is used to upgrade from Premium to
Advance license. The license can only be installed on
all SKUs that have a Premium license installed.
N/A
1
ICX 6610-ADV-UPG-LIC-SW
Sold separately. To purchase
the Upgrade license, contact
your Brocade representative.
ICX 6610 - Ports on Demand license
To upgrade the ICX 6610 1 Gbps ports to 10 Gbps
port speed, use the ICX6610-10G-LIC-POD license.
By default, the ICX 6610 device has eight active 1
Gbps uplink ports. To increase the uplink capacity
of four ports from 1 Gbps to 10 Gbps port speed,
purchase a single ICX6610-10G-LIC-POD license.
To increase the uplink capacity of all eight ports
from 1 Gbps to 10 Gbps port speed, purchase a
second ICX6610-10G-LIC-POD license.
N/A
1
ICX 6610-10G-LIC-POD
Sold separately. To purchase
the Ports on Demand
license, contact your
Brocade representative.
ICX 6450
Software-based
licensing is only
supported on
ICX 6450
devices.
Premium Layer 3:
OSPF v2
RIP v1, v2
VRRP
VRRP-E
N/A
1
ICX6450-PREM-LIC N/A
TABLE 32 Licensed features and part numbers (Continued)
Product Licensed feature or feature set Image filename Part numbers for
software license only
Part numbers for hardware with
pre-installed software license