Configuration Guide User guide

204 FastIron Configuration Guide
53-1002494-02
Licensed features and part numbers
ICX 6450- Ports on Demand license
The ICX 6450 device has four active uplink or
stacking ports on slot 2. By default, ports 1 and 3
are 10 Gbps ports. By default, without a license at
bootup, ports 2 and 4 come up in 10 Gbps port
speed in an error disabled state. To enable ports 2
and 4 to 10 Gbps port speed, purchase the
ICX6450-2X10G-LIC-POD license. The PoD feature
is not applicable to ICX 6430 devices because
there are no 10 Gbps ports on the device.
N/A
1
ICX6450-2X10G-LIC-
POD
Sold separately. To purchase
the Ports on Demand
license, contact your
Brocade representative.
FESX6
IPv4 PREM Layer 3:
• 6,000 active host routes
• Anycast RP
• BGP4
• DVMRP V2
• IGMP V1, V2, and V3
• ICMP redirect messages
• IGMP V3 fast leave (for routing)
• MSDP
• OSPF V2
• PIM-DM
• PIM-SM
• PIM passive
• Policy-based routing
• RIP V1 and V2
• Route-only support
• Route redistribution
• VRRP-E
SXRxxxxx.bin
(full Layer 3)
FESX624-L3U-IPV4-
SW
FESX624-PREM
FESX624-PREM--DC
FESX624+2XG-PREM
FESX624+2XG-PREM-DC
FESX624HF-PREM
FESX624HF-PREM-DC
FESX624HF+2XG-PREM
FESX624HF+2XG-PREM-DC
FESX648-L3U-IPV4-
SW
FESX648-PREM
FESX648-PREM--DC
FESX648+2XG-PREM
FESX648+2XG-PREM-DC
IPv6 PREM Layer 3:
• Same features as “IPv4 PREM Layer 3:”, plus
the following:
• IPv6 Layer 3 forwarding
• IPv6 over IPv4 tunnels in hardware
• IPv6 redistribution
• IPv6 static routes
• OSPF V3
• RIPng
SXRxxxxx.bin
(full Layer 3)
FESX624-L3U-IPV6-
SW
FESX624-PREM6
FESX624-PREM6--DC
FESX624+2XG-PREM6
FESX624+2XG-PREM6-DC
FESX624HF-PREM6
FESX624HF-PREM6-DC
FESX624HF+2XG-PREM6
FESX624HF+2XG-PREM6-DC
FESX648-L3U-IPV6-
SW
FESX648-PREM6
FESX648-PREM6--DC
FESX648+2XG-PREM6
FESX648+2XG-PREM6-DC
TABLE 32 Licensed features and part numbers (Continued)
Product Licensed feature or feature set Image filename Part numbers for
software license only
Part numbers for hardware with
pre-installed software license