Configuration Guide User guide
FastIron Configuration Guide 205
53-1002494-02
Licensed features and part numbers
FSX 800 and
FSX 1600
IPv4 PREM Layer 3 for IPv4 management
modules:
• 6,000 active host routes
• Anycast RP
• BGP4
• DVMRP V2
• IGMP V1, V2, and V3
• ICMP redirect messages
• IGMP V3 fast leave (for routing)
• MSDP
• OSPF V2
• PIM-DM
• PIM-SM
• PIM passive
• Policy-based routing
• RIP V1 and V2
• Route-only support
• Route redistribution
• VRRP-E
• IPv4 over GRE
• Multicast over GRE
SXRxxxxx.bin
(full Layer 3)
SX-FIL3U-SW SX-FIZMR-PREM
SX-FI2XGMR4-PREM
IPv4 PREM Layer 3 for IPv6-ready management
modules:
Same features as “IPv4 PREM Layer 3 for IPv4
management modules:”
SXRxxxxx.bin
(full Layer 3)
SX-FIL3U-6-IPV4-SW SX-FIZMR-6-PREM
SX-FI2XGMR6-PREM
IPv4 and IPv6 PREM Layer 3 for IPv6-ready
management modules:
Same features as “IPv4 PREM Layer 3 for IPv4
management modules:”, plus the following:
• IPv6 Layer 3 forwarding
• IPv6 over IPv4 tunnels in hardware
• IPv6 redistribution
• IPv6 static routes
• OSPF V3
• RIPng
• IPv6 over GRE
SXRxxxxx.bin
(full Layer 3)
SX-FIL3U-6-IPV4-SW
and
SX-FIL3U-6-IPV6-SW
SX-FIZMR-6-PREM6
SX-FI2XGMR6-PREM6
1. This licensed feature does not require a separate software image file. Feature capability is disabled on the switch until a license is loaded.
TABLE 32 Licensed features and part numbers (Continued)
Product Licensed feature or feature set Image filename Part numbers for
software license only
Part numbers for hardware with
pre-installed software license