Configuration Guide User guide

210 FastIron Configuration Guide
53-1002494-02
Licensing for Ports on Demand
Brocade(config-mif-2/3/5-2/3/8)#speed-duplex 10g-full
Port 2/3/5 mode changed from 1G to 10G
Port 2/3/6 mode changed from 1G to 10G
Port 2/3/7 mode changed from 1G to 10G
Port 2/3/8 mode changed from 1G to 10G
Brocade(config-mif-2/3/5-2/3/8)#end
Syntax: [no] flexible-10g-ports upper
Use the no form of the flexible-10g-ports upper command when you want to enable the lower four
PoD ports, instead of the upper four PoD ports, to 10 Gbps port speed. Before you issue the no
flexible-10g-ports upper command, you must first issue the no speed-duplex 10g-full command on
the upper four PoD ports.
To display the configuration for the flexible-10g-ports upper command on a stack unit, use the
show stack <stack-unit> command.
Syntax: show stack <stack-unit>
Displaying license configuration for PoD ports after a license upgrade
NOTE
The show pod command cannot be used to display the configuration for 1 Gbps or 40 Gbps ports on
ICX 6610 and ICX 6450 devices.
The show pod command is used to display a license configuration for PoD ports in a stack after a
license upgrade on ICX 6610 and ICX 6450 devices. To display general license information about
the PoD license in a stack unit, use the show license command. For more information about the
show license command, refer to “Viewing the license database” on page 229.
Displaying license configuration for PoD ports for ICX 6610 devices
To display a license configuration for all PoD ports for all units in a stack, enter the following
command at the CLI level.
Brocade#show pod
Unit-Id: 1
PoD license capacity: 4 (UPPER)
PoD license capacity used: 4
PoD-ports Lic-state
1/3/1 default
1/3/2 default
1/3/3 default
1/3/4 default
1/3/5 acquired
Brocade#show stack 1
stack unit 1
module 1 icx6610-24f-sf-port-management-module
module 2 icx6610-qsfp-10-port-160g-module
module 3 icx6610-8-port-10g-dual-mode-module
stack-trunk 1/2/1 to 1/2/2
stack-trunk 1/2/6 to 1/2/7
stack-port 1/2/1 1/2/6
flexible-10g-ports upper