Configuration Guide User guide

FastIron Configuration Guide 231
53-1002494-02
Viewing information about software licenses
Syntax: show license [unit <unit_id>]
The unit <unit_id> parameter specifies the unit ID number. The unit ID number is available only on
FCX, ICX 6610, and ICX 6450 devices.
Table 37 describes the information displayed by the show license unit <unit_id> command
To display detailed information about a license for a specific unit, use the show license unit
<unit_id> [index <index_number>] command. The following example shows a sample output.
Syntax: show license unit <unit_id> [index <index_number>]
TABLE 37 Output from the show license unit command
Field Description
Index The index number specifies the software license file for a specific stack
The index number is generated by the member unit.
License Name The name of license installed for the license index number on the stack
unit.
Lid The license ID. This number is embedded in the Brocade device.
License Type Indicates whether the license is normal (permanent) or trial (temporary).
Status Indicates the status of the license:
• Valid – A license is valid if the LID matches the serial number of the
device for which the license was purchased, and the package name
is recognized by the system.
• Invalid – The LID does not match the serial number of the device
for which the license was purchased.
• Active – The license is valid and in effect on the device.
• Not used – The license is not in effect on the device.
• Expired – For trial licenses only, this indicates that the trial license
has expired.
License Period If the license type is trial (temporary), this field displays the number of
days the license is valid. If the license type is normal (permanent), this
field displays Unlimited.
License capacity The port capacity of the PoD license. For ICX 6610 devices, the PoD
license can be a 4 port capacity license, or a 8 port capacity license
depending on the number of licenses purchased. For ICX 6450 devices,
the field displays license capacity 2 when the PoD license is purchased
for two ports (ports two and four). The license capacity field is displayed
in the show license command outputs for ICX 6610, ICX 6450, and FCX
devices only.
Brocade#show license unit 3 index 1
License information for unit 3 license <1>:
+license name: FCX-ADV-LIC-SW
+lid: deaHHKIgFrN
+license type: Normal
+status: Active
+license period: Unlimited
Trial license information:
+days used: 10
+hours used: 21
+days left: 30
+hours left: 18