Configuration Guide User guide

232 FastIron Configuration Guide
53-1002494-02
Viewing information about software licenses
The index <license_index> parameter specifies the software license file that you want to display
information for. The index <index_number> option is available only on FCX, ICX 6610, and ICX
6450 devices.
Table 38 describes the information displayed by the show license unit <unit_id> [index
<index_number>] command.
Viewing software packages installed in the device
Use the show version command to view the software packages that are currently running in the
device. The following example is sample output from an FCX unit with the package
FCX_ADV_ROUTER_SOFT_PACKAGE installed on units 1, 3, and 5.
NOTE
The software package name is not the same as the license name.
Brocade#show version
Copyright (c) 1996-2011 Brocade Communications Systems, Inc.
UNIT 5: compiled on Jun 24 2011 at 14:20:38 labeled as FCXR07203a
(6674957 bytes) from Primary FCXR07203a.bin
UNIT 1: compiled on Jun 24 2011 at 14:20:38 labeled as FCXR07203a
(6674957 bytes) from Primary FCXR07203a.bin
UNIT 2: compiled on Jun 24 2011 at 14:20:38 labeled as FCXR07203a
(6674957 bytes) from Primary FCXR07203a.bin
UNIT 3: compiled on Jun 24 2011 at 14:20:38 labeled as FCXR07203a
(6674957 bytes) from Primary FCXR07203a.bin
UNIT 4: compiled on Jun 24 2011 at 14:20:38 labeled as FCXR07203a
(6674957 bytes) from Primary FCXR07203a.bin
TABLE 38 Output from the show license command
Field Description
+license name The name of the license installed on the unit.
+lid The license ID. This number is embedded in the Brocade device.
+license type Indicates whether the license is normal (permanent) or trial (temporary).
+status Indicates the status of the license:
• Valid – A license is valid if the LID matches the serial number of the
device for which the license was purchased, and the package name
is recognized by the system.
• Invalid – The LID does not match the serial number of the device
for which the license was purchased.
• Active – The license is valid and in effect on the device.
• Not used – The license is not in effect on the device.
• Expired – For trial licenses only, this indicates that the trial license
has expired.
+license period If the license type is trial (temporary), this field displays the number of
days the license is valid. If the license type is normal (permanent), this
field displays Unlimited.
+ days used The number of days the trial license has been in effect.
+ hours used The number of hours the trial license has been in effect.
+ days left The number of days left before the trial license expires.
+ hours left The number of hours left before the trial license expires.