Configuration Guide User guide

270 FastIron Configuration Guide
53-1002494-02
Verifying an IronStack configuration
Please remove stack-trunk 1/2/3 - 1/2/4 using "stack-trunk" or "multi-trunk"
command before removing stack port 1/2/3.
Verifying an IronStack configuration
Complete the following step to verify your IronStack configuration.
Log in to the Active Controller and verify the stack information by entering the show running-config
and show stack or show stack detail commands. If your stack is configured properly, you should
see the following:
• One Active Controller, one Standby Controller, and stack members.
• All stack members show a status of Ready
The following output shows an example configuration of an FCX IronStack.
Brocade# show stack
alone: standalone, D: dynamic config, S: static config
ID Type Role Mac Address Pri State Comment
2 S FCX648POE standby 00e0.5202.0000 0 remote Ready
3 S FCX624POE member 00e0.5203.0000 0 remote Ready
4 S FCX648 member 00e0.5204.0000 0 remote Ready
5 S FCX648POE member 0000.0000.0000 0 remoteReady
8 S FCX648POE active 00e0.5201.0000 128 local Ready
active standby
+---+ +---+ +---+ +---+
-2/1| 8 |2/2--2/1| 4 |2/2--2/1| 3 |2/2--2/1| 2 |2/2-
| +---+ +---+ +---+ +---+ |
|--------------------------------------------------|
Current stack management MAC is 00e0.5201.0000
Results for ICX devices are similar, with an equals sign (=) to show connections between trunk
ports, rather than the hyphen symbol (
-) showing connections.
The next example shows output from the show version command for the same FCX stack.
Brocade# show version
Copyright (c) 1996-2009 Brocade Communications Systems, Inc.
UNIT 8: compiled on Jun 17 2009 at 06:23:29 labeled as FCX06000a359
(3578117 bytes) from Primary FCX06000a359.bin
SW: Version 06.0.00a359T7f1
UNIT 2: compiled on Jun 17 2009 at 06:23:29 labeled as FCX06000a359
(3578117 bytes) from Primary FCX06000a359.bin
SW: Version 06.0.00a359T7f1
UNIT 3: compiled on Jun 17 2009 at 06:23:29 labeled as FCX06000a359
(3578117 bytes) from Primary FCX06000a359.bin
SW: Version 06.0.00a359T7f1
UNIT 4: compiled on Jun 17 2009 at 06:23:29 labeled as FCX06000a359
(3578117 bytes) from Primary FCX06000a359.bin
SW: Version 06.0.00a359T7f1
Boot-Monitor Image size = 365257, Version:06.0.00T7f5 (grz06000)
HW: Stackable FCX648P-POE
==========================================================================
UNIT 2: SL 1: FCX-48G POE 48-port Management Module
P-ENGINE 0: type DB90, rev 01
P-ENGINE 1: type DB90, rev 01