Configuration Guide User guide

FastIron Configuration Guide 293
53-1002494-02
Brocade IronStack management
Syntax: show module
Table 45 describes the fields displayed in this output example.
Displaying stack resource information
Use the show stack resource command to display stack resource information, as shown in the
example output from a Brocade ICX 6610 switch.
Brocade# show stack resource
alloc in-use avail get-fail limit get-mem size init
register attribute 4800 2710 2090 0 556800 4810 334 2400
general 12B data 32 10 22 0 7424 12 12 32
RB-tree node 4096 2714 1382 0 237568 3026 18 1024
variable length link 3905 4 3901 0 905960 4 8 3905
AU msg dev0 4092 0 4092 0 16368 0 16 4092
AU msg dev1 4092 0 4092 0 16368 0 16 4092
Syntax: show stack resource
Table 46 describes the output fields for this command. This command displays the following
information for register attributes, general 12B data, and RB-tree node.
Displaying stack information
You can display information about any and all of the members in an IronStack by entering show
commands from the Active Controller console port. If you enter show commands from a unit that is
not the Active Controller, the information may not be displayed correctly.
The show stack command displays general information about an IronStack, for all members, for a
specified member, and with additional detail if required.
TABLE 45 Field definitions for the show module command
Field Description
Module Identifies the module, by stack unit ID, module number, module type
Status The status of this module
Ports The number of ports in this module
Starting MAC The starting MAC address for this module
TABLE 46 Field definitions for the show stack resource command
Field Description
alloc Memory allocated
in-use Memory in use
avail Available memory
get-fail The number of get requests that have failed.
limit The maximum memory allocation
get-mem The number of get-memory requests
size The size
init The number of requests initiated.